EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of Voltage–Current Reference Source in CMOS Technology

Tomasz Borejko, Witold Adam Pleskacz

Electronics · 27.10.2024 · 13 (21) · 4212

DOI: 10.3390/electronics13214212 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 27.10.2024. Verfasst von Tomasz Borejko und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish National Centre for Research and Development.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A design methodology for a resistorless low-power two-in-one voltage and current reference source working in subthreshold and moderate regions is described. The presented novel universal reference voltage–current source was implemented in ten different designs for seven different CMOS technologies. Six versions of these designs were silicon-proven using four different CMOS technologies. The example of implementation in 130 nm technology provides a reference current of 5 µA and reference voltage of 800 mV at supply voltages ranging from 0.9 V to 2.0 V with a total current consumption of 15 µA. The proposed circuit occupies a 1200 µm2 chip area and achieves 280 and 118 ppm/°C for all process corners and temperature variation from −40 °C to 125 °C. The power supply rejection ratio of output IREF without any filtering capacitor at 100 Hz and 10 MHz is 128 dB and 100 dB, respectively. The equivalent output current noise in the bandwidth from 1 Hz to 10 MHz reaches 9.1 nARMS.

Förderung

  • Polish National Centre for Research and Development

Zitieren

APA

Borejko, T., & Pleskacz, W. A. (2024). Design of Voltage–Current Reference Source in CMOS Technology. Electronics, 13(21), 4212. https://doi.org/10.3390/electronics13214212

Vancouver

Borejko T, Pleskacz WA. Design of Voltage–Current Reference Source in CMOS Technology. Electronics. 2024;13(21):4212. doi:10.3390/electronics13214212

BibTeX
@article{Borejko2024,
  author = {Borejko, Tomasz and Pleskacz, Witold Adam},
  title = {Design of Voltage–Current Reference Source in CMOS Technology},
  journal = {Electronics},
  year = {2024},
  volume = {13},
  number = {21},
  pages = {4212},
  doi = {10.3390/electronics13214212}
}
Kostenlos starten →