EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling, Design, and Application of Analog Pre-Distortion for the Linearity and Efficiency Enhancement of a K-Band Power Amplifier

Tommaso Cappello, Sarmad Ozan, Andy Tucker, Peter Krier, Tudor Williams, Kevin Morris

Electronics · 27.09.2024 · 13 (19) · 3818

DOI: 10.3390/electronics13193818 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 27.09.2024. Verfasst von Tommaso Cappello und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the theory, design, and application of a dual-branch series-diode analog pre-distortion (APD) linearizer to improve the linearity and efficiency of a K-band high-power amplifier (HPA). A first-of-its-kind, frequency-dependent large-signal APD model is presented. This model is used to evaluate different phase relationships between the linear and nonlinear branches, suggesting independent gain and phase expansion characteristics with this topology. This model is used to assess the impact of diode resistance, capacitance, and ideality factors on the APD characteristics. This feature is showcased with two similar GaAs diodes to find the best fit for the considered HPA. The selected diode is characterized and modeled between 1 and 26.5 GHz. A comprehensive APD design and simulation workflow is reported. Before fabrication, the simulated APD is evaluated with the measured HPA to verify linearity improvements. The APD prototype achieves a large-signal bandwidth of 6 GHz with 3 dB gain expansion and 8° phase rotation. This linearizer is demonstrated with a 17–21 GHz GaN HPA with 41 dBm output power and 35% efficiency. Using a wideband 750 MHz signal, this APD improves the noise–power ratio (NPR) by 6.5–8.2 dB over the whole HPA bandwidth. Next, the HPA output power is swept to compare APD vs. power backoff for the same NPR. APD improves the HPA output power by 1–2 W and efficiency by approximately 5–9% at 19 GHz. This efficiency improvement decreases by only 1–2% when including the APD post-amplifier consumption, thus suggesting overall efficiency and output power improvements with APD at K-band frequencies.

Zitieren

APA

Cappello, T., Ozan, S., Tucker, A., Krier, P., Williams, T., & Morris, K. (2024). Modeling, Design, and Application of Analog Pre-Distortion for the Linearity and Efficiency Enhancement of a K-Band Power Amplifier. Electronics, 13(19), 3818. https://doi.org/10.3390/electronics13193818

Vancouver

Cappello T, Ozan S, Tucker A, Krier P, Williams T, Morris K. Modeling, Design, and Application of Analog Pre-Distortion for the Linearity and Efficiency Enhancement of a K-Band Power Amplifier. Electronics. 2024;13(19):3818. doi:10.3390/electronics13193818

BibTeX
@article{Cappello2024,
  author = {Cappello, Tommaso and Ozan, Sarmad and Tucker, Andy and Krier, Peter and Williams, Tudor and Morris, Kevin},
  title = {Modeling, Design, and Application of Analog Pre-Distortion for the Linearity and Efficiency Enhancement of a K-Band Power Amplifier},
  journal = {Electronics},
  year = {2024},
  volume = {13},
  number = {19},
  pages = {3818},
  doi = {10.3390/electronics13193818}
}
Kostenlos starten →