EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessment of the Winding Mechanical Condition Based on Transformer Vibration during Transient Processes

Yao Yuan, Jiafeng Zhao, Kaixing Hong, Ning Wang, Jing Zheng

Electronics · 27.06.2024 · 13 (13) · 2519

DOI: 10.3390/electronics13132519 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 27.06.2024. Verfasst von Yao Yuan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Southern Power Grid, Key Area Research and Development Program of Guangdong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes an operation modal analysis (OMA)-based approach to obtain a transformer’s mechanical condition from vibrations during the transformer’s transient processes, such as short-circuit and power-off conditions. Such processes generate a short transient vibration response, which yields a spectrum with poor frequency resolution. Vibration before the transient process could be included to increase the signal length; however, this would introduce a forced vibration component into the spectrum, making it challenging to distinguish the modal frequencies. To overcome these problems, a time–frequency analysis-based algorithm is proposed to extract the modal frequency spectrum from the vibration signal with the high-frequency resolution, providing clearer insight into the mechanical condition of the transformer. A faulty-state indicator is then proposed based on the similarity between the extracted modal spectrum and the initial modal spectrum obtained under a healthy state. To validate the proposed method, laboratory experiments were conducted under short-circuit and power-off conditions. Two mechanical faults—the looseness of the winding clamping and winding deformation—are introduced. The results show that both faults will cause variations in the modal frequency spectrum, leading to significant decreases in the indicator value. In summary, the proposed method can effectively evaluate a transformer’s mechanical condition in an OMA setting.

Förderung

  • China Southern Power Grid
  • Key Area Research and Development Program of Guangdong Province

Zitieren

APA

Yuan, Y., Zhao, J., Hong, K., Wang, N., & Zheng, J. (2024). Assessment of the Winding Mechanical Condition Based on Transformer Vibration during Transient Processes. Electronics, 13(13), 2519. https://doi.org/10.3390/electronics13132519

Vancouver

Yuan Y, Zhao J, Hong K, Wang N, Zheng J. Assessment of the Winding Mechanical Condition Based on Transformer Vibration during Transient Processes. Electronics. 2024;13(13):2519. doi:10.3390/electronics13132519

BibTeX
@article{Yuan2024,
  author = {Yuan, Yao and Zhao, Jiafeng and Hong, Kaixing and Wang, Ning and Zheng, Jing},
  title = {Assessment of the Winding Mechanical Condition Based on Transformer Vibration during Transient Processes},
  journal = {Electronics},
  year = {2024},
  volume = {13},
  number = {13},
  pages = {2519},
  doi = {10.3390/electronics13132519}
}
Kostenlos starten →