EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Piezoelectric MEMS Energy Harvester for Low-Power Applications

George Muscalu, Bogdan Firtat, Adrian Anghelescu, Carmen Moldovan, Silviu Dinulescu, Costin Brasoveanu, Magdalena Ekwinska, Dariusz Szmigiel, Michal Zaborowski, Jerzy Zajac, Ion Stan, Adrian Tulbure

Electronics · 27.05.2024 · 13 (11) · 2087

DOI: 10.3390/electronics13112087 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 27.05.2024. Verfasst von George Muscalu und 11 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: UEFISCDI during the M-era.Net project PiezoMEMS, M-era.Net project funded by UEFISCDI, SmartEnergy, European Commission, through the HORIZON-WIDERA-2021-ACCESS-03-Net4Air project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the global market value of sensors on the rise, this paper focuses on the fabrication and testing of a proof-of-concept piezoelectric energy harvester which is able to harvest mechanical energy from the ambient environment and convert it into electrical energy in order to power wireless sensor networks. We focused on obtaining a new device structure based on a comb-type array of piezoelectric MEMS cantilevers (2 × 10) for a resonant frequency in the environmental application domain (a few hundred Hz) and a chip area of only 1 cm2. The configuration of the lead-free piezoelectric cantilever consists of a Si substrate, a pair of Ti-Pt electrodes and a sputtered piezoelectric layer of 12% Sc-doped AlN with a thickness of 1000 nm, a dielectric constant of ~13 and e31,f = 1.3 C/m2. At a resonant frequency of 465.2 Hz and an acceleration of 1 g, the maximum value for the collected power was 2.53 µW for an optimal load resistance of 1 MΩ resulting in a power density of 60.2 nW/mm3 for the unpacked device, without taking into account the vibration volume. By increasing the excitation acceleration to 2 g RMS and using LTC3588-1 for the power circuitry we were able to obtain a stabilized output voltage of 1.8 V.

Förderung

  • UEFISCDI during the M-era.Net project PiezoMEMS
  • M-era.Net project funded by UEFISCDI, SmartEnergy
  • European Commission, through the HORIZON-WIDERA-2021-ACCESS-03-Net4Air project

Zitieren

APA

Muscalu, G., Firtat, B., Anghelescu, A., Moldovan, C., Dinulescu, S., Brasoveanu, C., Ekwinska, M., Szmigiel, D., Zaborowski, M., Zajac, J., Stan, I., & Tulbure, A. (2024). Piezoelectric MEMS Energy Harvester for Low-Power Applications. Electronics, 13(11), 2087. https://doi.org/10.3390/electronics13112087

Vancouver

Muscalu G, Firtat B, Anghelescu A, Moldovan C, Dinulescu S, Brasoveanu C, et al. Piezoelectric MEMS Energy Harvester for Low-Power Applications. Electronics. 2024;13(11):2087. doi:10.3390/electronics13112087

BibTeX
@article{Muscalu2024,
  author = {Muscalu, George and Firtat, Bogdan and Anghelescu, Adrian and Moldovan, Carmen and Dinulescu, Silviu and Brasoveanu, Costin and Ekwinska, Magdalena and Szmigiel, Dariusz and Zaborowski, Michal and Zajac, Jerzy and Stan, Ion and Tulbure, Adrian},
  title = {Piezoelectric MEMS Energy Harvester for Low-Power Applications},
  journal = {Electronics},
  year = {2024},
  volume = {13},
  number = {11},
  pages = {2087},
  doi = {10.3390/electronics13112087}
}
Kostenlos starten →