Constant-Voltage and Constant-Current Controls of the Inductive Power Transfer System for Electric Vehicles Based on Full-Bridge Synchronous Rectification
Electronics · 26.04.2024 · 13 (9) · 1686
DOI: 10.3390/electronics13091686 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 26.04.2024. Verfasst von Jin Cai und 6 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China Youth Project, Natural Science Foundation of Hubei Provincial.
Abstract (Originalsprache)
When an inductive power transfer (IPT) system conducts wireless charging for electric cars, the coupling coefficient between the coils is easily affected by fluctuations in the external environment. With frequent changes in the battery load impedance, it is difficult for the IPT system to achieve constant-voltage and constant-current (CVCC) controls. A CVCC control method is proposed for the IPT system that has a double-sided LCC compensation structure based on full-bridge synchronous rectification. The proposed method achieved good dynamic stability and was able to effectively switch between the output current and voltage of the system by adjusting only the duty cycle of the switch on the secondary side of the rectification bridge. As a result, the system efficiency was improved. The output characteristics of the double-sided LCC compensation structure was derived and the conduction condition with zero voltage was analyzed by using four switches through two conduction time series of the rectifier circuit. Then, the output voltage of the synchronized rectifier was derived. The hardware implementation of the full-bridge controllable rectifier was described in detail. Finally, a MATLAB/Simulink 2018a simulation model was developed and applied to an 11 kW prototype to analyze and validate the design. The results showed that the designed system had good CVCC output characteristics and could maintain constant output under certain coupling offsets. Compared with semi synchronous rectification methods, the proposed method had a higher efficiency, which was 95.6% at the rated load.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China Youth Project
- Natural Science Foundation of Hubei Provincial
Zitieren
APA
Cai, J., Sun, P., Ji, K., Wu, X., Ji, H., Wang, Y., & Rong, E. (2024). Constant-Voltage and Constant-Current Controls of the Inductive Power Transfer System for Electric Vehicles Based on Full-Bridge Synchronous Rectification. Electronics, 13(9), 1686. https://doi.org/10.3390/electronics13091686
Vancouver
Cai J, Sun P, Ji K, Wu X, Ji H, Wang Y, et al. Constant-Voltage and Constant-Current Controls of the Inductive Power Transfer System for Electric Vehicles Based on Full-Bridge Synchronous Rectification. Electronics. 2024;13(9):1686. doi:10.3390/electronics13091686
BibTeX
@article{Cai2024,
author = {Cai, Jin and Sun, Pan and Ji, Kai and Wu, Xusheng and Ji, Hang and Wang, Yuxiao and Rong, Enguo},
title = {Constant-Voltage and Constant-Current Controls of the Inductive Power Transfer System for Electric Vehicles Based on Full-Bridge Synchronous Rectification},
journal = {Electronics},
year = {2024},
volume = {13},
number = {9},
pages = {1686},
doi = {10.3390/electronics13091686}
}
EUVIMED