Improved Carrier-Based Modulation for the Single-Phase T-Type qZ Source Inverter
Electronics · 18.03.2024 · 13 (6) · 1113
DOI: 10.3390/electronics13061113 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 18.03.2024. Verfasst von Vitor Fernão Pires und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FCT, Fundação para a Ciência e a Tecnologia.
Abstract (Originalsprache)
The Quasi-Impedance-Source Inverter (Quasi-Z inverter) is an interesting DC-AC converter topology that can be used in applications such as fuel cells and photovoltaic generators. This topology allows for both boost capability and DC-side continuous input current. Another very interesting feature is its reliability, as it limits the current when two switches on one leg are conducting simultaneously. This is due to an extra conduction state, specifically the shoot-through state. However, the shoot-through state also causes a loss of performance, increasing electromagnetic interference and harmonic distortion. To address these issues, this work proposes a modified carrier-based control method for the T-Type single-phase quasi-Z inverter. The modified carrier-based method introduces the use of two additional states to replace the standard shoot-through state. The additional states are called the upper shoot-through and the lower shoot-through. An approach to minimize the number of switches that change state during transitions will also be considered to reduce switching losses, improving the converter efficiency. The proposed modified carrier-based control strategy will be tested using computer simulations and laboratory experiments. From the obtained results, the theoretical considerations are confirmed. In fact, through the presented results, it is possible to understand important improvements that can be obtained in the THD of the output voltage and load current. In addition, it is also possible to verify that the modified carrier method also reduces the input current ripple.
Förderung
- FCT, Fundação para a Ciência e a Tecnologia
Zitieren
APA
Pires, V. F., Cordeiro, A., Foito, D., Roncero-Clemente, C., Romero-Cadaval, E., & Silva, J. F. (2024). Improved Carrier-Based Modulation for the Single-Phase T-Type qZ Source Inverter. Electronics, 13(6), 1113. https://doi.org/10.3390/electronics13061113
Vancouver
Pires VF, Cordeiro A, Foito D, Roncero-Clemente C, Romero-Cadaval E, Silva JF. Improved Carrier-Based Modulation for the Single-Phase T-Type qZ Source Inverter. Electronics. 2024;13(6):1113. doi:10.3390/electronics13061113
BibTeX
@article{Pires2024,
author = {Pires, Vitor Fernão and Cordeiro, Armando and Foito, Daniel and Roncero-Clemente, Carlos and Romero-Cadaval, Enrique and Silva, José Fernando},
title = {Improved Carrier-Based Modulation for the Single-Phase T-Type qZ Source Inverter},
journal = {Electronics},
year = {2024},
volume = {13},
number = {6},
pages = {1113},
doi = {10.3390/electronics13061113}
}
EUVIMED