EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An All-Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

Wei Zhong, Yemin Dong, Lili Lang, Wei Xiong, Lin Sun, Yu Liu, Haijing Liu, Zhenwei Zhang

Electronics · 12.03.2024 · 13 (6) · 1058

DOI: 10.3390/electronics13061058 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 12.03.2024. Verfasst von Wei Zhong und 7 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Foundation of the Strategic Priority Research Program of the Chinese Academy of Sciences, Shanghai Sailing Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes an all-digital calibration algorithm that utilizes a reference channel to suppress the timing mismatch in the Time-Interleaved Analog-to-Digital Converter (TIADC). The output of the reference channel is aligned with each sub-channel in turn, therefore enabling the simultaneous sampling and conversion of the same input signal. First, the statistical characteristics across the channels are employed for estimating the timing mismatch; then, by comparing the output difference between the reference channel and the sub-channels that are sampled simultaneously, the deviation of the derivator can be calibrated. Finally, combining both calibration results yields an accurate final output. This proposed algorithm provides an effective solution to improve TIADC performance in high-speed data acquisition systems. The proposed architecture is applied to a 12-bit 2.4 GS/s four-channel TIADC model, and then its effectiveness is verified. The simulation results exhibit that the Effective Number Of Bits (ENOB) at an input signal frequency of 984 MHz shows a remarkable improvement from 6.88 bits to 11.92 bits. The effectiveness of this technique is also demonstrated through the off-chip calibration of a commercial 12-bit four-channel 2 GS/s TIADC using a 680 MHz input signal that is based on the actual chip results.

Förderung

  • Research Foundation of the Strategic Priority Research Program of the Chinese Academy of Sciences
  • Shanghai Sailing Program

Zitieren

APA

Zhong, W., Dong, Y., Lang, L., Xiong, W., Sun, L., Liu, Y., Liu, H., & Zhang, Z. (2024). An All-Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC. Electronics, 13(6), 1058. https://doi.org/10.3390/electronics13061058

Vancouver

Zhong W, Dong Y, Lang L, Xiong W, Sun L, Liu Y, et al. An All-Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC. Electronics. 2024;13(6):1058. doi:10.3390/electronics13061058

BibTeX
@article{Zhong2024,
  author = {Zhong, Wei and Dong, Yemin and Lang, Lili and Xiong, Wei and Sun, Lin and Liu, Yu and Liu, Haijing and Zhang, Zhenwei},
  title = {An All-Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC},
  journal = {Electronics},
  year = {2024},
  volume = {13},
  number = {6},
  pages = {1058},
  doi = {10.3390/electronics13061058}
}
Kostenlos starten →