EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

FPGA-Based Implementation of an Adaptive Noise Controller for Continuous Wave Superconducting Cavity

Fatemeh Abdi, Wojciech Cichalewski, Wojciech Jałmużna, Łukasz Butkowski, Julien Branlard, Andrea Bellandi, Grzegorz Jabłoński

Electronics · 29.12.2023 · 13 (1) · 155

DOI: 10.3390/electronics13010155 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 29.12.2023. Verfasst von Fatemeh Abdi und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Lodz University of Technology in Lodz, Poland, DESY in Hamburg, Germany.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Low-level radio frequency (LLRF) systems have been designed to regulate the accelerator field in the cavity; these systems have been used in the free electron laser (FLASH) and European X-ray free-electron laser (E-XFEL). However, the reliable operation of these cavities is often hindered by two primary sources of noise and disturbances: Lorentz force detuning (LFD) and mechanical vibrations, commonly known as microphonics. This article presents an innovative solution in the form of a narrowband active noise controller (NANC) designed to compensate for the narrowband mechanical noise generated by certain supporting machines, such as vacuum pumps and helium pressure vibrations. To identify the adaptive filter coefficients in the NANC method, a least mean squares (LMS) algorithm is put forward. Furthermore, a variable step size (VSS) method is proposed to estimate the adaptive filter coefficients based on changes in microphonics, ultimately compensating for their effects on the cryomodule. An accelerometer with an SPI interface and some transmission boards are manufactured and mounted at the cryomodule test bench (CMTB) to measure the microphonics and transfer them via Ethernet cable from the cryomodule side to the LLRF crate side. Several locations had been selected to find the optimal location for installing the accelerometer. The proposed NANC method is characterized by low computational complexity, stability, and high tracking ability. By addressing the challenges associated with noise and disturbances in cavity operation, this research contributes to the enhanced performance and reliability of LLRF systems in particle accelerators.

Förderung

  • Lodz University of Technology in Lodz, Poland
  • DESY in Hamburg, Germany

Zitieren

APA

Abdi, F., Cichalewski, W., Jałmużna, W., Butkowski, Ł., Branlard, J., Bellandi, A., & Jabłoński, G. (2023). FPGA-Based Implementation of an Adaptive Noise Controller for Continuous Wave Superconducting Cavity. Electronics, 13(1), 155. https://doi.org/10.3390/electronics13010155

Vancouver

Abdi F, Cichalewski W, Jałmużna W, Butkowski Ł, Branlard J, Bellandi A, et al. FPGA-Based Implementation of an Adaptive Noise Controller for Continuous Wave Superconducting Cavity. Electronics. 2023;13(1):155. doi:10.3390/electronics13010155

BibTeX
@article{Abdi2023,
  author = {Abdi, Fatemeh and Cichalewski, Wojciech and Jałmużna, Wojciech and Butkowski, Łukasz and Branlard, Julien and Bellandi, Andrea and Jabłoński, Grzegorz},
  title = {FPGA-Based Implementation of an Adaptive Noise Controller for Continuous Wave Superconducting Cavity},
  journal = {Electronics},
  year = {2023},
  volume = {13},
  number = {1},
  pages = {155},
  doi = {10.3390/electronics13010155}
}
Kostenlos starten →