Positioning Control Strategy of Hydraulic Support Pushing System in Fully Mechanized Coal Face
Electronics · 28.08.2023 · 12 (17) · 3628
DOI: 10.3390/electronics12173628 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 28.08.2023. Verfasst von Tengyan Hou und 5 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China “Study on high pressure, large flow and high water-based digital valve and its control method in mining”.
Abstract (Originalsprache)
At present, the hydraulic support pushing system in coal mines usually uses an electrohydraulic directional valve as the control component. However, the existing control methods based on high-speed on–off valve, servo, and proportional control methods are not suitable for solving such problems because of the nonideal characteristics of the electrohydraulic directional valve, such as discrete input values, low switching frequency, and time delay. This paper proposes a positioning control scheme based on online predictive feedback for the control of hydraulic cylinders by electrohydraulic directional valves. In this scheme, the recursive least-squares estimation algorithm with genetic factors is used to identify the required prediction model in real time, and an improved radial basis function network based on generalized growth and shear is used to realize the online fitting of the target trajectory function. The online learning algorithm provides accurate prediction information for the switching control method, and finally, the hydraulic cylinder can be positioned near the target position using the optimal control method. By using the above methods, a well-designed model can be accurately identified, fundamentally solving the problem of control difficulties caused by the nonideal characteristics of the electrohydraulic directional valve. Finally, the effectiveness of the control scheme is verified through simulation analysis and physical experiment research, which proves that the control strategy can realize accurate and fast positioning control for the hydraulic support pushing system of a fully mechanized mining face.
Förderung
- National Natural Science Foundation of China “Study on high pressure, large flow and high water-based digital valve and its control method in mining”
Zitieren
APA
Hou, T., Kou, Z., Wu, J., Xu, P., Zhang, B., & Peng, Y. (2023). Positioning Control Strategy of Hydraulic Support Pushing System in Fully Mechanized Coal Face. Electronics, 12(17), 3628. https://doi.org/10.3390/electronics12173628
Vancouver
Hou T, Kou Z, Wu J, Xu P, Zhang B, Peng Y. Positioning Control Strategy of Hydraulic Support Pushing System in Fully Mechanized Coal Face. Electronics. 2023;12(17):3628. doi:10.3390/electronics12173628
BibTeX
@article{Hou2023,
author = {Hou, Tengyan and Kou, Ziming and Wu, Juan and Xu, Peng and Zhang, Buwen and Peng, Yanwei},
title = {Positioning Control Strategy of Hydraulic Support Pushing System in Fully Mechanized Coal Face},
journal = {Electronics},
year = {2023},
volume = {12},
number = {17},
pages = {3628},
doi = {10.3390/electronics12173628}
}
EUVIMED