Design of a GaAs-Based Ka-Band Low Noise Amplifier MMIC with Gain Flatness Enhancement
Electronics · 21.05.2023 · 12 (10) · 2325
DOI: 10.3390/electronics12102325 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 21.05.2023. Verfasst von Zhe Yang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper presents a GaAs-based Ka-band low noise amplifier (LNA) with gain flatness enhancement. Active device optimization and inductive degeneration techniques were employed to obtain a low noise figure (NF) and good input/output return loss. In order to achieve a flat gain response over a wide bandwidth, the stagger tuning technique was utilized. The proposed LNA was implemented by 0.15 μm GaAs pHEMT process, and the chip area is only 1.5 × 0.9 mm2. Measurement results show that the presented LNA exhibits a small signal gain of 21.5 ± 0.3 dB, and the NF of the LNA is less than 2.2 dB from 32 to 40 GHz at room temperature.
Zitieren
APA
Yang, Z., Wang, K., Fan, Y., Yan, Y., & Liang, X. (2023). Design of a GaAs-Based Ka-Band Low Noise Amplifier MMIC with Gain Flatness Enhancement. Electronics, 12(10), 2325. https://doi.org/10.3390/electronics12102325
Vancouver
Yang Z, Wang K, Fan Y, Yan Y, Liang X. Design of a GaAs-Based Ka-Band Low Noise Amplifier MMIC with Gain Flatness Enhancement. Electronics. 2023;12(10):2325. doi:10.3390/electronics12102325
BibTeX
@article{Yang2023,
author = {Yang, Zhe and Wang, Kuisong and Fan, Yihui and Yan, Yuepeng and Liang, Xiaoxin},
title = {Design of a GaAs-Based Ka-Band Low Noise Amplifier MMIC with Gain Flatness Enhancement},
journal = {Electronics},
year = {2023},
volume = {12},
number = {10},
pages = {2325},
doi = {10.3390/electronics12102325}
}
EUVIMED