A Mixed Hardware-Software Implementation of a High-Performance PMSM Controller
Electronics · 14.01.2023 · 12 (2) · 440
DOI: 10.3390/electronics12020440 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 14.01.2023. Verfasst von Adam Milik und 1 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education for Statutory Activities of Digital Systems Division of the Silesian University of Technology of Gliwice.
Abstract (Originalsprache)
Implementation of the permanent magnet synchronous motor vector control implies strong time dependencies. The control process requires precise measurement of motor shaft position and winding currents to establish correct driving. The tight time dependencies are difficult to achieve using a programmatic approach. Specific controller architecture is proposed for programmable systems on chip architectures enabling operations precise timing and improved processing performance. The controller is decomposed into a dedicated hardware interface system and programmatic part for easy implementation and modification of the control algorithm. The proposed architecture offers precise and repeatable input-output operations timing and assures meeting tight time dependencies. The control algorithm is executed as an interrupt service requested by the interface system in a constant processing period with relatively weak time dependencies. Additionally, the interface system preprocesses input and output signals reducing the computation effort and saving time for algorithm computations. The specific implementation enabled improved measurement of the motor’s windings current with suppression of disturbances caused by inverter operation. There is shown an efficient implementation of Parke’s and Clarke’s transformations using specific resources of modern programmable logic devices. In opposite to the software-managed implementation presented implementation assures completing processing faster, using a minimal number of hardware resources of the FPGA platform and offering the highest flexibility of software part implementation.
Förderung
- Ministry of Science and Higher Education for Statutory Activities of Digital Systems Division of the Silesian University of Technology of Gliwice
Zitieren
APA
Milik, A., & Rudnicki, T. (2023). A Mixed Hardware-Software Implementation of a High-Performance PMSM Controller. Electronics, 12(2), 440. https://doi.org/10.3390/electronics12020440
Vancouver
Milik A, Rudnicki T. A Mixed Hardware-Software Implementation of a High-Performance PMSM Controller. Electronics. 2023;12(2):440. doi:10.3390/electronics12020440
BibTeX
@article{Milik2023,
author = {Milik, Adam and Rudnicki, Tomasz},
title = {A Mixed Hardware-Software Implementation of a High-Performance PMSM Controller},
journal = {Electronics},
year = {2023},
volume = {12},
number = {2},
pages = {440},
doi = {10.3390/electronics12020440}
}
EUVIMED