EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Situ Coating Thickness Measurement of Parylene Using a Capacitive Sensor

Manuel Seidenath, Daniel Jäger, Jochen Wilhelm, Hubert Rauh, Martin Maerz

Electronic Materials · 02.06.2026 · 7 (2) · 11

DOI: 10.3390/electronicmat7020011 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronic Materials, online erschienen am 02.06.2026. Verfasst von Manuel Seidenath und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal ministry for economic affairs and climate action.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With parylene coatings, conventional layer thickness measurement methods such as gravimetry, reflectometry, and cross-sectional microscopy are performed post-process and do not allow real-time monitoring or control. This paper presents a novel in situ measurement method based on the capacitance change in interdigitated copper electrodes fabricated on a printed circuit board (PCB). As parylene deposits on this sensor, the effective permittivity above the electrodes increases from ϵr≈1 (vacuum) to ϵr=2.1–3.2 (parylene), causing a measurable capacitance change. Finite element simulations were performed to model the relationship between layer thickness and sensor capacitance. Experimental validation with parylene C and F-VT4 demonstrated good agreement between simulation and measurement. Four consecutive parylene C runs with 60 g raw material showed reproducible capacitance increases of 49–53 pF, corresponding to layer thicknesses of 20–25 µm, verified by cross-sectional microscopy. Two coating runs were performed with parylene F-VT4 with target layer thicknesses of 2.5 µm and 5 µm. They show particularly good agreement with the simulation. The proposed method enables real-time process monitoring and provides a foundation for closed-loop control of parylene CVD processes.

Förderung

  • Federal ministry for economic affairs and climate action

Zitieren

APA

Seidenath, M., Jäger, D., Wilhelm, J., Rauh, H., & Maerz, M. (2026). In Situ Coating Thickness Measurement of Parylene Using a Capacitive Sensor. Electronic Materials, 7(2), 11. https://doi.org/10.3390/electronicmat7020011

Vancouver

Seidenath M, Jäger D, Wilhelm J, Rauh H, Maerz M. In Situ Coating Thickness Measurement of Parylene Using a Capacitive Sensor. Electronic Materials. 2026;7(2):11. doi:10.3390/electronicmat7020011

BibTeX
@article{Seidenath2026,
  author = {Seidenath, Manuel and Jäger, Daniel and Wilhelm, Jochen and Rauh, Hubert and Maerz, Martin},
  title = {In Situ Coating Thickness Measurement of Parylene Using a Capacitive Sensor},
  journal = {Electronic Materials},
  year = {2026},
  volume = {7},
  number = {2},
  pages = {11},
  doi = {10.3390/electronicmat7020011}
}
Kostenlos starten →