EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Standard Electrical Bonding Strategies for the Hybrid Integration of Inkjet-Printed Electronics

Lukas Rauter, Johanna Zikulnig, Taulant Sinani, Hubert Zangl, Lisa-Marie Faller

Electronic Materials · 2020

DOI: 10.3390/electronicmat1010002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronic Materials, 2020. Verfasst von Lukas Rauter und 4 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Different conductive bonding strategies for the hybrid integration of flexible, inkjet-printed electronics are investigated. The focus of the present work lies on providing a practical guide comprising standard techniques that are inexpensive, easily implementable and frequently used. A sample set consisting of identical conductive test structures on different paper and plastic substrates was prepared using silver (Ag) nanoparticle ink. The sintered specimens were electrically contacted using soldering, adhesive bonding and crimping. Electrical and mechanical characterization before and after exposing the samples to harsh environmental conditions was performed to evaluate the reliability of the bonding methods. Resistance measurements were done before and after connecting the specimens. Afterwards, 85 °C/85% damp-heat tests and tensile tests were applied. Adhesive bonding appears to be the most suitable and versatile method, as it shows adequate stability on all specimen substrates, especially after exposure to a 85 °C/85% damp-heat test. During exposure to mechanical tensile testing, adhesive bonding proved to be the most stable, and forces up to 12 N could be exerted until breakage of the connection. As a drawback, adhesive bonding showed the highest increase in electrical resistance among the different bonding strategies.

Förderung

  • European Regional Development Fund

Zitieren

APA

Rauter, L., Zikulnig, J., Sinani, T., Zangl, H., & Faller, L. (2020). Evaluation of Standard Electrical Bonding Strategies for the Hybrid Integration of Inkjet-Printed Electronics. Electronic Materials. https://doi.org/10.3390/electronicmat1010002

Vancouver

Rauter L, Zikulnig J, Sinani T, Zangl H, Faller L. Evaluation of Standard Electrical Bonding Strategies for the Hybrid Integration of Inkjet-Printed Electronics. Electronic Materials. 2020. doi:10.3390/electronicmat1010002

BibTeX
@article{Rauter2020,
  author = {Rauter, Lukas and Zikulnig, Johanna and Sinani, Taulant and Zangl, Hubert and Faller, Lisa-Marie},
  title = {Evaluation of Standard Electrical Bonding Strategies for the Hybrid Integration of Inkjet-Printed Electronics},
  journal = {Electronic Materials},
  year = {2020},
  doi = {10.3390/electronicmat1010002}
}
Kostenlos starten →