EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quantifying Acceleration Factors for Electrode Degradation in Membrane Electrode Assembly Stress Tests for Heavy-Duty Fuel Cells

Rajesh Ahluwalia, Xiaohua Wang, Leiming Hu, Kate Chen, Calita M. Quesada, Erica Young, Timothy Van Cleve, Xiaojing Wang, Jacob S. Spendelow, Kenneth C. Neyerlin, Rangachary Mukundan

Electrochem · 30.10.2026 · 7 (4) · 33

DOI: 10.3390/electrochem7040033 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electrochem, online erschienen am 30.10.2026. Verfasst von Rajesh Ahluwalia und 10 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Energy Office of Critical Minerals and Energy Innovation Alternative Fuels and Feedstocks Office.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates accelerated stress test (AST) protocols and introduces a framework for translating AST-derived degradation metrics into electrode lifetime predictions for heavy-duty vehicle fuel cells. Catalyst stability across ASTs of varying durations is compared using the electrochemically active surface area (ECSA) loss rate, which remains broadly consistent across catalyst systems and Pt loadings but is extremely sensitive to protocol design and exposure conditions. The corresponding cell performance decay is captured through ECSA loss and its impact on exchange current density and oxygen transport resistance. These degradation pathways are further shaped by catalyst particle size and composition, catalyst–support interactions, the catalyst–ionomer interface, and electrode microstructure. Building on these relationships, a practical procedure is developed to estimate electrode lifetime using the allowable ECSA loss predicted by the degradation model, the measured AST ECSA loss rate, and the duty-cycle lifetime of a reference catalyst with matching Pt loading. To generalize AST outcomes, an acceleration (loss) factor, ALF, is defined as the ratio of electrode lifetime to the AST duration required to reach an equivalent end-of-life ECSA loss. The ALF is uniquely determined by catalyst formulation, Pt loading, AST protocol, duty-cycle characteristics, end-of-life definition, and system-level mitigation strategies.

Förderung

  • U.S. Department of Energy Office of Critical Minerals and Energy Innovation Alternative Fuels and Feedstocks Office

Zitieren

APA

Ahluwalia, R., Wang, X., Hu, L., Chen, K., Quesada, C. M., Young, E., Cleve, T. V., Wang, X., Spendelow, J. S., Neyerlin, K. C., & Mukundan, R. (2026). Quantifying Acceleration Factors for Electrode Degradation in Membrane Electrode Assembly Stress Tests for Heavy-Duty Fuel Cells. Electrochem, 7(4), 33. https://doi.org/10.3390/electrochem7040033

Vancouver

Ahluwalia R, Wang X, Hu L, Chen K, Quesada CM, Young E, et al. Quantifying Acceleration Factors for Electrode Degradation in Membrane Electrode Assembly Stress Tests for Heavy-Duty Fuel Cells. Electrochem. 2026;7(4):33. doi:10.3390/electrochem7040033

BibTeX
@article{Ahluwalia2026,
  author = {Ahluwalia, Rajesh and Wang, Xiaohua and Hu, Leiming and Chen, Kate and Quesada, Calita M. and Young, Erica and Cleve, Timothy Van and Wang, Xiaojing and Spendelow, Jacob S. and Neyerlin, Kenneth C. and Mukundan, Rangachary},
  title = {Quantifying Acceleration Factors for Electrode Degradation in Membrane Electrode Assembly Stress Tests for Heavy-Duty Fuel Cells},
  journal = {Electrochem},
  year = {2026},
  volume = {7},
  number = {4},
  pages = {33},
  doi = {10.3390/electrochem7040033}
}
Kostenlos starten →