Poly(3,4-Ethylenedioxythiophene)-Centered TiO2 Hybrid Electrodes for HER- and OER-Relevant Photoelectrochemical Responses
Electrochem · 03.08.2026 · 7 (3) · 22
DOI: 10.3390/electrochem7030022 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electrochem, online erschienen am 03.08.2026. Verfasst von Yu Zhou und 5 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: JSPS KAKENHI.
Abstract (Originalsprache)
Photoelectrochemical (PEC) energy conversion is a promising approach for solar-to-chemical fuel production, but its practical performance is limited by insufficient visible-light utilization and charge-carrier recombination. Here, poly(3,4-ethylenedioxythiophene) (PEDOT)-centered TiO2 hybrid electrodes were prepared by electropolymerizing PEDOT on FTO substrates, followed by electrochemical doping/dedoping treatment and coating with commercial TiO2 as a model oxide semiconductor. SEM, EDS, and LIBS analyses confirmed the successful deposition of TiO2 onto PEDOT-based films. Four-probe measurements showed that electrochemical doping reduced the apparent resistance of PEDOT-based electrodes, while UV–vis spectroscopy revealed enhanced long-wavelength absorption for doped PEDOT-containing films. PEC measurements using TiO2, PEDOT, and TiO2–PEDOT electrodes showed that PEDOT-containing electrodes exhibited much stronger photoresponses than commercial TiO2 alone under both HER- and OER-relevant conditions. The TiO2–PEDOT electrode showed stable photocurrent responses under chopped illumination and retained photoresponse under illumination transmitted through a 410 nm UV-cut filter, supporting the primary role of PEDOT in visible-light utilization. Long-term chronoamperometry further showed that TiO2–PEDOT retained approximately 99.0% of its cathodic current under HER-relevant conditions and 91.9% of its anodic current under OER-relevant conditions after 5200 s of continuous illumination. The improved response of TiO2–PEDOT compared with PEDOT alone suggests that TiO2/PEDOT physical contact may assist interfacial charge separation and transport. These findings demonstrate that PEDOT-centered metal oxide/conducting polymer hybrids provide a useful model platform for visible-light-responsive PEC energy-conversion applications.
Förderung
- JSPS KAKENHI
Zitieren
APA
Zhou, Y., Kurioka, T., Chen, C., Hsu, Y., Sone, M., & Chang, T. M. (2026). Poly(3,4-Ethylenedioxythiophene)-Centered TiO2 Hybrid Electrodes for HER- and OER-Relevant Photoelectrochemical Responses. Electrochem, 7(3), 22. https://doi.org/10.3390/electrochem7030022
Vancouver
Zhou Y, Kurioka T, Chen C, Hsu Y, Sone M, Chang TM. Poly(3,4-Ethylenedioxythiophene)-Centered TiO2 Hybrid Electrodes for HER- and OER-Relevant Photoelectrochemical Responses. Electrochem. 2026;7(3):22. doi:10.3390/electrochem7030022
BibTeX
@article{Zhou2026,
author = {Zhou, Yu and Kurioka, Tomoyuki and Chen, Chun-Yi and Hsu, Yung-Jung and Sone, Masato and Chang, Tso-Fu Mark},
title = {Poly(3,4-Ethylenedioxythiophene)-Centered TiO2 Hybrid Electrodes for HER- and OER-Relevant Photoelectrochemical Responses},
journal = {Electrochem},
year = {2026},
volume = {7},
number = {3},
pages = {22},
doi = {10.3390/electrochem7030022}
}
EUVIMED