EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Facile Fabrication of CuO Modified TiO2 Heterostructure for Enhanced Photocathodic Corrosion Protection of 304 Stainless Steel

Abinaya Radhakrishnan, Manoja Tharmaraj, Anuradha Ramani, Nagarajan Srinivasan

Electrochem · 12.06.2025 · 6 (2) · 21

DOI: 10.3390/electrochem6020021 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electrochem, online erschienen am 12.06.2025. Verfasst von Abinaya Radhakrishnan und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 86 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, protecting stainless steel from corrosion has become crucial, particularly in harsh environments. The present study focuses on improving the photocathodic corrosion resistance of 304 stainless steel (304SS) by fabricating TiO2/CuO composite coatings using the spin coating technique with varying CuO weight percentages. Structural characterization through X-ray diffraction (XRD) confirmed the presence of the anatase phase of TiO2 and the successful integration of CuO. Raman spectroscopy demonstrated redshifts in the TiO2 characteristic peaks, suggesting changes in bond lengths attributed to CuO incorporation. These findings were further corroborated by Fourier-transform infrared (FTIR) spectroscopy. Surface characterization showed uniform, porous coatings with pore sizes ranging from 75 to 200 nm, which contributed to improved barrier properties. UV–visible diffuse reflectance spectroscopy (UV-DRS) demonstrated enhanced visible light absorption in the heterostructures. Mott–Schottky analysis confirmed improved charge carrier density and favorable band alignment, facilitating efficient charge separation. The electrochemical performance was evaluated in 3.5% NaCl solution under dark and light environments. The results demonstrated that the TiO2/CuO heterostructure significantly enhanced electron transfer and suppressed electron-hole recombination, providing adequate photocathodic protection. Notably, under illumination, the TiO2/CuO (0.005 g) coating achieved a corrosion potential of −255 mV vs SCE and reduced the corrosion current density to 0.460 × 10−6 mA cm−2. These findings suggest that TiO2/CuO coatings offer a promising, durable, and cost-effective solution for corrosion protection in industries such as oil, shipbuilding, and pipelines.

Zitieren

APA

Radhakrishnan, A., Tharmaraj, M., Ramani, A., & Srinivasan, N. (2025). Facile Fabrication of CuO Modified TiO2 Heterostructure for Enhanced Photocathodic Corrosion Protection of 304 Stainless Steel. Electrochem, 6(2), 21. https://doi.org/10.3390/electrochem6020021

Vancouver

Radhakrishnan A, Tharmaraj M, Ramani A, Srinivasan N. Facile Fabrication of CuO Modified TiO2 Heterostructure for Enhanced Photocathodic Corrosion Protection of 304 Stainless Steel. Electrochem. 2025;6(2):21. doi:10.3390/electrochem6020021

BibTeX
@article{Radhakrishnan2025,
  author = {Radhakrishnan, Abinaya and Tharmaraj, Manoja and Ramani, Anuradha and Srinivasan, Nagarajan},
  title = {Facile Fabrication of CuO Modified TiO2 Heterostructure for Enhanced Photocathodic Corrosion Protection of 304 Stainless Steel},
  journal = {Electrochem},
  year = {2025},
  volume = {6},
  number = {2},
  pages = {21},
  doi = {10.3390/electrochem6020021}
}
Kostenlos starten →