Enhanced Performance of Sodium-Ion Battery Cathodes with Ti and V Co-Doped P2-Type Na0.67Fe0.5Mn0.5O2 Materials
Electrochem · 18.10.2024 · 5 (4) · 437-454
DOI: 10.3390/electrochem5040029 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electrochem, online erschienen am 18.10.2024. Verfasst von Trapa Banik und 5 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tennessee Valley Authority.
Abstract (Originalsprache)
Manganese- and iron-rich P2-type Na0.67Fe0.5Mn0.5O2 (NFM) has garnered significant interest as a promising cathode candidate due to the natural abundance of Fe and Mn along with a high redox couple of Fe3+/Fe4+ and Mn3+/Mn4+. Despite all these merits, NFM suffers from structural instability during cycling, arising from the destructive Jahn-Teller (JT) distortion effect of Mn3+/Mn4+ during charging and Fe4+/Fe3+ during discharging. In this research, a novel P2-type transition metal-oxide cathode Na0.67Fe0.5−2xMn0.5TixVxO2 was synthesized by doping a tiny fraction of two electrochemically inactive elements, Titanium (Ti) and Vanadium (V), into Mn-rich Na0.67Fe0.5Mn0.5O2 (NFM) that mitigated the JT effect substantially and ameliorated the stability of the SIB during cycling. These exhaustive structural and morphological comparisons provided insights into the effects of V and Ti doping on stabilizing surface structures, reducing Jahn Teller distortion, enhancing stability and capacity retention, and promoting the Na+ carrier transport mechanism. Moreover, the electrochemical analysis, such as the galvanostatic charge/discharge profile, validates the capacity improvement via Ti and V co-doping into NFM cathode. The initial discharge capacity of the 2% Ti/V-doped Na0.67Fe0.48Mn0.5Ti0.01V0.01O2 (2NFMTV) was found to be 187.12 mAh g−1 at a rate of 0.1 C, which was greater than the discharge capacity of 175.15 mAh g−1 observed for pure NFM (Na0.67Mn0.5Fe0.5O2). In contrast, 2NFMTV exhibited a noteworthy capacity retention of 46.1% when evaluated for its original capacity after undergoing 150 cycles at a rate of 0.1 C. This research also established a structural doping approach as a feasible technique for advancing the progress of next-generation Sodium-ion Batteries.
Förderung
- Tennessee Valley Authority
Zitieren
APA
Banik, T., Bhattacharya, I., Savunthari, K. V., Mukerjee, S., Adepoju, W., & Olatunji, A. (2024). Enhanced Performance of Sodium-Ion Battery Cathodes with Ti and V Co-Doped P2-Type Na0.67Fe0.5Mn0.5O2 Materials. Electrochem, 5(4), 437-454. https://doi.org/10.3390/electrochem5040029
Vancouver
Banik T, Bhattacharya I, Savunthari KV, Mukerjee S, Adepoju W, Olatunji A. Enhanced Performance of Sodium-Ion Battery Cathodes with Ti and V Co-Doped P2-Type Na0.67Fe0.5Mn0.5O2 Materials. Electrochem. 2024;5(4):437-454. doi:10.3390/electrochem5040029
BibTeX
@article{Banik2024,
author = {Banik, Trapa and Bhattacharya, Indranil and Savunthari, Kirankumar Venkatesan and Mukerjee, Sanjeev and Adepoju, Webster and Olatunji, Abiodun},
title = {Enhanced Performance of Sodium-Ion Battery Cathodes with Ti and V Co-Doped P2-Type Na0.67Fe0.5Mn0.5O2 Materials},
journal = {Electrochem},
year = {2024},
volume = {5},
number = {4},
pages = {437--454},
doi = {10.3390/electrochem5040029}
}
EUVIMED