Hardware-in-the-Loop Platform with an Edge-Computing Node for Comparative Evaluation of Maximum Power Point Tracking Algorithms in Photovoltaic Systems
Electricity · 09.11.2026 · 7 (4) · 139
DOI: 10.3390/electricity7040139 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electricity, online erschienen am 09.11.2026. Verfasst von Jhon Montano und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institución Universitaria ITM and Universidad Nacional de Colombia, Universidad Nacional de Colombia-Sede Medellín.
Abstract (Originalsprache)
Maximum Power Point Tracking (MPPT) algorithms can perform properly in simulations but can degrade on real hardware because of delays, discretization, and computational limitations. This study presents a low-cost hardware-in-the-loop platform, with an MPPT controller runing on an edge-computing node, for the evaluation of MPPT algorithms of photovoltaic systems. A Raspberry Pi Pico 2W emulates both a photovoltaic module of three substrings with bypass diodes, which reproduces partial shading, and a boost converter whose model is integrated every 10 μs; a Raspberry Pi 5, acting as the edge node, runs the MPPT and a current loop every 5 ms. An improved Perturb and Observe (P&O) algorithm and a hybrid particle swarm optimization (PSO) algorithm, neither of which receives the irradiance, were compared on uniform and partially shaded step profiles with 10 seeded runs per algorithm and profile. Under partial shading, PSO achieved an energy efficiency of 91.9±0.6% vs. 82.4±1.0% for P&O and ended 90.9% of the steps at the global maximum power point vs. 54.5%; under uniform irradiance, PSO obtained 94.7±0.3% and P&O 96.9±0.1%. Efficiency is measured against the emulator model. The edge node held the 5 ms period with a standard deviation of 0.078 ms. Data and scripts are openly available.
Förderung
- Institución Universitaria ITM and Universidad Nacional de Colombia
- Universidad Nacional de Colombia-Sede Medellín
Zitieren
APA
Montano, J., Candelo-Becerra, J. E., Barrera-Castañeda, J., Herrera-Jaramillo, D. A., & Hoyos, F. E. (2026). Hardware-in-the-Loop Platform with an Edge-Computing Node for Comparative Evaluation of Maximum Power Point Tracking Algorithms in Photovoltaic Systems. Electricity, 7(4), 139. https://doi.org/10.3390/electricity7040139
Vancouver
Montano J, Candelo-Becerra JE, Barrera-Castañeda J, Herrera-Jaramillo DA, Hoyos FE. Hardware-in-the-Loop Platform with an Edge-Computing Node for Comparative Evaluation of Maximum Power Point Tracking Algorithms in Photovoltaic Systems. Electricity. 2026;7(4):139. doi:10.3390/electricity7040139
BibTeX
@article{Montano2026,
author = {Montano, Jhon and Candelo-Becerra, John E. and Barrera-Castañeda, Jorge and Herrera-Jaramillo, Diego Alejandro and Hoyos, Fredy E.},
title = {Hardware-in-the-Loop Platform with an Edge-Computing Node for Comparative Evaluation of Maximum Power Point Tracking Algorithms in Photovoltaic Systems},
journal = {Electricity},
year = {2026},
volume = {7},
number = {4},
pages = {139},
doi = {10.3390/electricity7040139}
}
EUVIMED