EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Objective Longitudinal Monitoring of Burn Wound Area Using 3D Surface Scanning: A Pilot Study

Bibiána Ondrejová iD, Katarína Dudová iD, Monika Michalíková, Lucia Bednarčíková iD, Jozef Živčák, Tomáš Demčák iD, Peter Lengyel iD

European Burn Journal · 06.03.2026 · 7 (1) · 15

DOI: 10.3390/ebj7010015 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Burn Journal, online erschienen am 06.03.2026. Verfasst von Bibiána Ondrejová und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering and Measurement, Faculty of Mechanical Engineering, Technical University of Košice, Letná 1/9, 042 00 Košice, Sl…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovak Research and Development Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Burn assessment traditionally relies on visual inspection and 2D estimation, which introduces substantial variability in determining wound size and healing progression. Three-dimensional (3D) surface scanning offers a more objective alternative, yet the clinical utility of area-based metrics obtained from 3D surface data remains insufficiently defined. This pilot study aimed to evaluate structured-light 3D scanning for objective longitudinal quantification of the burn wound surface area and a description of area-based healing dynamics derived from repeated measurements.

Methods

Eighteen patients with 43 acute thermal burns underwent serial structured-light scanning, followed by manual segmentation of wound regions and the calculation of absolute and percentage area reduction as well as TBSA-normalized metrics. Longitudinal monitoring was performed by comparing sequential 3D surface models acquired at defined clinical follow-ups, enabling the calculation of absolute area change (ΔA), percentage reduction, daily healing rate, and ΔTBSA%.

Results

Baseline wound areas ranged from 7.27 to 2137.98 cm2. Percentage area reduction ranged from 5.25% to 92.30%. The overall reduction in burn burden (ΔTBSA) ranged from 0.07% to 12.94%. Large wounds tended to show rapid absolute area reduction (>100–300 cm2/day) during early follow-up, while small superficial burns frequently achieved >80% reduction within 10–15 days.

Conclusions

These findings suggest that 3D surface scanning may support the objective longitudinal assessment of burn wound healing. This pilot provides a basis for future studies evaluating additional topographic parameters and broader clinical applications.

Schlagwörter

Stichwörter der Autor:innen

3D scanningburnwound analysis

Autor:innen und Institutionen

  • Department of Biomedical Engineering and Measurement, Faculty of Mechanical Engineering, Technical University of Košice, Letná 1/9, 042 00 Košice, Slovakia.
  • Burns and Reconstructive Plastic Surgery Clinic, AGEL Hospital Košice Šaca, Lúčna 512, 040 15 Šaca, Slovakia.

ORCID-Profile: Bibiána Ondrejová, Katarína Dudová, Lucia Bednarčíková, Tomáš Demčák, Peter Lengyel

Förderung

  • Slovak Research and Development Agency

Zitieren

APA

Ondrejová, B., Dudová, K., Michalíková, M., Bednarčíková, L., Živčák, J., Demčák, T., & Lengyel, P. (2026). Objective Longitudinal Monitoring of Burn Wound Area Using 3D Surface Scanning: A Pilot Study. European Burn Journal, 7(1), 15. https://doi.org/10.3390/ebj7010015

Vancouver

Ondrejová B, Dudová K, Michalíková M, Bednarčíková L, Živčák J, Demčák T, et al. Objective Longitudinal Monitoring of Burn Wound Area Using 3D Surface Scanning: A Pilot Study. European Burn Journal. 2026;7(1):15. doi:10.3390/ebj7010015

BibTeX
@article{Ondrejov2026,
  author = {Ondrejová, Bibiána and Dudová, Katarína and Michalíková, Monika and Bednarčíková, Lucia and Živčák, Jozef and Demčák, Tomáš and Lengyel, Peter},
  title = {Objective Longitudinal Monitoring of Burn Wound Area Using 3D Surface Scanning: A Pilot Study},
  journal = {European Burn Journal},
  year = {2026},
  volume = {7},
  number = {1},
  pages = {15},
  doi = {10.3390/ebj7010015}
}
Kostenlos starten →