EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Study of Entropy Production in a Fluidic Oscillator

José Omar Dávalos iD, Delfino Cornejo-Monroy iD, Alfredo Villanueva-Montellano iD, Diana Ortiz-Muñoz iD, David Luviano-Cruz iD

Entropy · 13.04.2026 · 28 (4) · 437

DOI: 10.3390/e28040437 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Entropy, online erschienen am 13.04.2026. Verfasst von José Omar Dávalos und 4 weiteren Autor:innen. Beteiligte Einrichtung: Instituto de Ingeniería y Tecnología, Universidad Autónoma de Ciudad Juárez, Ciudad Juárez 32310, Chihuahua, Mexico. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A numerical study was conducted to quantify the entropy generation in a fluidic oscillator operating at Reynolds numbers of 30,000, 40,000, and 50,000. Both the local entropy production rate and total entropy were calculated under these operating conditions. Transient computational fluid dynamics (CFD) simulations were carried out using the k−ω shear stress transport (SST) turbulence model. The total entropy was compared with the pressure and driving-force coefficients to establish its relationship with force dynamics. The total entropy showed a periodic evolution synchronized with the jet switching process, while its amplitude increased with Reynolds number and showed a slight phase delay. The pressure and driving-force coefficients exhibited weak fluctuations at the end and beginning of each oscillation period, matching the secondary peaks in total entropy and indicating that these variations arise from residual dissipative effects linked to the jet reattachment stages. The local entropy production rate was concentrated near the feedback channels, Coanda surfaces, and the interaction zone where the jet from the inlet nozzle met the returning flow from the feedback channels. Regions of elevated entropy were detected at the outlet corners due to expansion and pressure drop. The high-velocity jet core exhibited minimal entropy, which increased toward the flanks as the flow decelerated. The results show that entropy generation follows the jet switching motion, reflecting the variations in viscous dissipation and flow dynamics inside the oscillator.

Schlagwörter

Stichwörter der Autor:innen

CFDfluidic oscillatorlocal entropy production rate (LEPR)

Autor:innen und Institutionen

  • Instituto de Ingeniería y Tecnología, Universidad Autónoma de Ciudad Juárez, Ciudad Juárez 32310, Chihuahua, Mexico.

ORCID-Profile: José Omar Dávalos, Delfino Cornejo-Monroy, Alfredo Villanueva-Montellano, Diana Ortiz-Muñoz, David Luviano-Cruz

Zitieren

APA

Dávalos, J. O., Cornejo-Monroy, D., Villanueva-Montellano, A., Ortiz-Muñoz, D., & Luviano-Cruz, D. (2026). Numerical Study of Entropy Production in a Fluidic Oscillator. Entropy, 28(4), 437. https://doi.org/10.3390/e28040437

Vancouver

Dávalos JO, Cornejo-Monroy D, Villanueva-Montellano A, Ortiz-Muñoz D, Luviano-Cruz D. Numerical Study of Entropy Production in a Fluidic Oscillator. Entropy. 2026;28(4):437. doi:10.3390/e28040437

BibTeX
@article{Dvalos2026,
  author = {Dávalos, José Omar and Cornejo-Monroy, Delfino and Villanueva-Montellano, Alfredo and Ortiz-Muñoz, Diana and Luviano-Cruz, David},
  title = {Numerical Study of Entropy Production in a Fluidic Oscillator},
  journal = {Entropy},
  year = {2026},
  volume = {28},
  number = {4},
  pages = {437},
  doi = {10.3390/e28040437}
}
Kostenlos starten →