Sustainable High Corrosion Resistance in High-Concentration NaCl Solutions for Refractory High-Entropy Alloys with High Strength and Good Plasticity
Entropy · 15.01.2026 · 28 (1) · 105
DOI: 10.3390/e28010105 ↗Kurz gefasst
Fachartikel in der Zeitschrift Entropy, online erschienen am 15.01.2026. Verfasst von Shunhua Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Hefei University of Technology, Hefei 230009, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: he Fundamental Research Funds for the Central Universities of China, Fundamental Research Funds for the Central Universities of China.
Abstract (Originalsprache)
Among corrosive environments, Cl− is one of the most aggressive anions which can cause electrochemical corrosion and the resultant failures of alloys, and the increase in Cl− concentration will further deteriorate the passive film in many conventional alloys. Here, we report single-phase Nb25Mo25Ta25Ti20W5Cx (x = 0.1, 0.3, 0.8 at.%) refractory high-entropy alloys (RHEAs) with excellent corrosion resistance in high-concentration NaCl solutions. According to potentiodynamic polarization, electrochemical impedance spectroscopy, corroded morphology and the current–time results, the RHEAs demonstrate even better corrosion resistance with the increase in NaCl concentration to 23.5 wt.%, significantly superior to 304 L stainless steel. Typically, the corrosion current density (icorr) and over-passivation potential (Et) reached the lowest and highest value, respectively, in the 23.5 wt.% NaCl solution, and the icorr (2.36 × 10−7 A/cm2) of Nb25Mo25Ta25Ti20W5C0.1 alloy is nearly two orders lower than that of 304 L stainless steel (1.75 × 10−5 A/cm2). The excellent corrosion resistance results from the formation of passive films with fewer defects and more stable oxides. Moreover, with the addition of the appropriate C element, the RHEAs also demonstrated improved strength and plasticity simultaneously, for example, the Nb25Mo25Ta25Ti20W5C0.3 alloy exhibited an average yield strength of 1368 MPa and a plastic strain of 19.7%. The present findings provide useful guidance to address the conflict between the excellent corrosion resistance and high strength of advanced alloys.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Hefei University of Technology, Hefei 230009, China.
- Key Laboratory of Advanced Functional Materials and Devices of Anhui Province, Hefei University of Technology, Hefei 230009, China.
ORCID-Profile: Shunhua Chen
Förderung
- he Fundamental Research Funds for the Central Universities of China
- Fundamental Research Funds for the Central Universities of China
Zitieren
APA
Chen, S., Liu, X., Li, C., Wang, W., & Yue, X. (2026). Sustainable High Corrosion Resistance in High-Concentration NaCl Solutions for Refractory High-Entropy Alloys with High Strength and Good Plasticity. Entropy, 28(1), 105. https://doi.org/10.3390/e28010105
Vancouver
Chen S, Liu X, Li C, Wang W, Yue X. Sustainable High Corrosion Resistance in High-Concentration NaCl Solutions for Refractory High-Entropy Alloys with High Strength and Good Plasticity. Entropy. 2026;28(1):105. doi:10.3390/e28010105
BibTeX
@article{Chen2026,
author = {Chen, Shunhua and Liu, Xinxin and Li, Chong and Wang, Wuji and Yue, Xiaokang},
title = {Sustainable High Corrosion Resistance in High-Concentration NaCl Solutions for Refractory High-Entropy Alloys with High Strength and Good Plasticity},
journal = {Entropy},
year = {2026},
volume = {28},
number = {1},
pages = {105},
doi = {10.3390/e28010105}
}
EUVIMED