EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Thermo-Hydraulics in a Lid-Driven Square Cavity with a Heated Hemispherical Obstacle at the Bottom

Farhan Lafta Rashid iD, Abbas Fadhil Khalaf iD, Arman Ameen iD, Mudhar A Al-Obaidi iD

Entropy · 08.05.2024 · 26 (5) · 408

DOI: 10.3390/e26050408 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Entropy, online erschienen am 08.05.2024. Verfasst von Farhan Lafta Rashid und 3 weiteren Autor:innen. Beteiligte Einrichtung: Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala 56001, Iraq. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lid-driven cavity (LDC) flow is a significant area of study in fluid mechanics due to its common occurrence in engineering challenges. However, using numerical simulations (ANSYS Fluent) to accurately predict fluid flow and mixed convective heat transfer features, incorporating both a moving top wall and a heated hemispherical obstruction at the bottom, has not yet been attempted. This study aims to numerically demonstrate forced convection in a lid-driven square cavity (LDSC) with a moving top wall and a heated hemispherical obstacle at the bottom. The cavity is filled with a Newtonian fluid and subjected to a specific set of velocities (5, 10, 15, and 20 m/s) at the moving wall. The finite volume method is used to solve the governing equations using the Boussinesq approximation and the parallel flow assumption. The impact of various cavity geometries, as well as the influence of the moving top wall on fluid flow and heat transfer within the cavity, are evaluated. The results of this study indicate that the movement of the wall significantly disrupts the flow field inside the cavity, promoting excellent mixing between the flow field below the moving wall and within the cavity. The static pressure exhibits fluctuations, with the highest value observed at the top of the cavity of 1 m width (adjacent to the moving wall) and the lowest at 0.6 m. Furthermore, dynamic pressure experiences a linear increase until reaching its peak at 0.7 m, followed by a steady decrease toward the moving wall. The velocity of the internal surface fluctuates unpredictably along its length while other parameters remain relatively stable.

Schlagwörter

Stichwörter der Autor:innen

lid-driven cavity (LDC)moving or stationary wallsseparationsquare cavitywall attachment

Autor:innen und Institutionen

  • Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala 56001, Iraq.
  • Department of Building Engineering, Energy Systems and Sustainability Science, University of Gävle, 801 76 Gävle, Sweden.
  • Technical Institute of Baquba, Middle Technical University, Baquba 32001, Iraq.
  • Technical Instructor Training Institute, Middle Technical University, Baghdad 10074, Iraq.

ORCID-Profile: Farhan Lafta Rashid, Abbas Fadhil Khalaf, Arman Ameen, Mudhar A Al-Obaidi

Zitieren

APA

Rashid, F. L., Khalaf, A. F., Ameen, A., & Al-Obaidi, M. A. (2024). Investigation of Thermo-Hydraulics in a Lid-Driven Square Cavity with a Heated Hemispherical Obstacle at the Bottom. Entropy, 26(5), 408. https://doi.org/10.3390/e26050408

Vancouver

Rashid FL, Khalaf AF, Ameen A, Al-Obaidi MA. Investigation of Thermo-Hydraulics in a Lid-Driven Square Cavity with a Heated Hemispherical Obstacle at the Bottom. Entropy. 2024;26(5):408. doi:10.3390/e26050408

BibTeX
@article{Rashid2024,
  author = {Rashid, Farhan Lafta and Khalaf, Abbas Fadhil and Ameen, Arman and Al-Obaidi, Mudhar A},
  title = {Investigation of Thermo-Hydraulics in a Lid-Driven Square Cavity with a Heated Hemispherical Obstacle at the Bottom},
  journal = {Entropy},
  year = {2024},
  volume = {26},
  number = {5},
  pages = {408},
  doi = {10.3390/e26050408}
}
Kostenlos starten →