Performance Comparison of Different Flat Plate Solar Collectors by Means of the Entropy Generation Rate Using Computational Fluid Dynamics
Entropy · 06.04.2023 · 25 (4) · 621
DOI: 10.3390/e25040621 ↗Kurz gefasst
Fachartikel in der Zeitschrift Entropy, online erschienen am 06.04.2023. Verfasst von J J Ramírez-Minguela und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Division of Natural and Exact Sciences, University of Guanajuato, Guanajuato 36050, Mexico. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Council of Science and Technology (CONACyT), Mexico, FONDO SECTORIAL DE INVESTIGACIÓN PARA LA EDUCACIÓN.
Abstract (Originalsprache)
In this work, a numerical analysis of three different flat plate solar collectors was conducted using their entropy generation rates. Specifically, the Computational Fluid Dynamics (CFD) technique was used to compare the detailed performance of conventional and zigzag tube geometries of flat plate solar collectors (FPCs) in terms of their entropy generation rates. The effects of fluid viscosity, heat transfer, and heat loss of the flat plate solar collectors were considered for the local and global entropy generation rate analyses. Variations on the inlet volumetric flow rate of the FPCs from 1.0 to 9.0 L/min were simulated under the average solar radiation for one year in the state of Guanajuato, Mexico. The results illustrate and discuss the temperatures, pressures, and global entropy generation rates for volumetric flow variations. The velocity, temperature, and pressure distributions and the maps of the local entropy generation rates inside the collectors are presented and analyzed for the case with a flow rate of 3.0 L/min. These results demonstrate that the zigzag geometries achieved higher outlet temperatures and greater entropy generation rates than the conventional geometry for all the volumetric flow rates considered.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, Division of Natural and Exact Sciences, University of Guanajuato, Guanajuato 36050, Mexico.
- Department of Mechanical Engineering, Engineering Division, Campus Irapuato-Salamanca, University of Guanajuato, Salamanca 36885, Mexico.
- Facultad de Ingeniería, Universidad Autónoma de Baja California, Mexicali 21280, Mexico.
ORCID-Profile: J J Ramírez-Minguela, V H Rangel-Hernández, J A Alfaro-Ayala, O A López-Núñez
Förderung
- National Council of Science and Technology (CONACyT), Mexico
- FONDO SECTORIAL DE INVESTIGACIÓN PARA LA EDUCACIÓN
Zitieren
APA
Ramírez-Minguela, J. J., Rangel-Hernández, V. H., Alfaro-Ayala, J. A., Elizalde-Blancas, F., Ruiz-Camacho, B., López-Núñez, O. A., & Alvarado-Rodríguez, C. E. (2023). Performance Comparison of Different Flat Plate Solar Collectors by Means of the Entropy Generation Rate Using Computational Fluid Dynamics. Entropy, 25(4), 621. https://doi.org/10.3390/e25040621
Vancouver
Ramírez-Minguela JJ, Rangel-Hernández VH, Alfaro-Ayala JA, Elizalde-Blancas F, Ruiz-Camacho B, López-Núñez OA, et al. Performance Comparison of Different Flat Plate Solar Collectors by Means of the Entropy Generation Rate Using Computational Fluid Dynamics. Entropy. 2023;25(4):621. doi:10.3390/e25040621
BibTeX
@article{RamrezMinguela2023,
author = {Ramírez-Minguela, J J and Rangel-Hernández, V H and Alfaro-Ayala, J A and Elizalde-Blancas, F and Ruiz-Camacho, B and López-Núñez, O A and Alvarado-Rodríguez, C E},
title = {Performance Comparison of Different Flat Plate Solar Collectors by Means of the Entropy Generation Rate Using Computational Fluid Dynamics},
journal = {Entropy},
year = {2023},
volume = {25},
number = {4},
pages = {621},
doi = {10.3390/e25040621}
}
EUVIMED