EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Determination of Interaction Parameters for CFD-DEM Modeling of Spouted Bed Hydrodynamics

Laira Pinto Borges, Júnia Natália Mendes Batista, Amarílis Severino e Souza, Rodrigo Béttega

Dynamics · 19.07.2026 · 6 (3) · 25

DOI: 10.3390/dynamics6030025 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dynamics, online erschienen am 19.07.2026. Verfasst von Laira Pinto Borges und 3 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil, Conselho Nacional de Desenvolvimento Científico e Tecnológico—Brasil.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The accuracy of CFD-DEM simulations of particulate systems strongly depends on the proper characterization of particle–particle and particle–wall interaction parameters. In this study, the coefficients of restitution, static friction, and rolling friction for ABS–ABS and ABS–acrylic interactions were experimentally determined for acrylonitrile butadiene styrene (ABS) spheres using free-fall, inclined-plane, and launch-ramp tests, respectively. The obtained parameters were subsequently applied in CFD-DEM simulations of a three-dimensional conical spouted bed operating with different solid loads. In parallel, experimental fluid dynamic tests were conducted to obtain characteristic pressure drop curves and determine the minimum spouting velocity. The experimental results exhibited the typical behavior of spouted beds, including hysteresis between the curves obtained by increasing and decreasing the inlet air velocity and higher minimum spouting velocities at greater solid loads. The CFD-DEM simulations successfully reproduced the main hydrodynamic features of the system, yielding deviations of 0.9%, 6.9%, and 20.5% for the minimum spouting velocities corresponding to solid loads of 400 g, 300 g, and 200 g, respectively. A comparison with the interaction parameters reported in the literature showed that the coefficients obtained through direct measurement provided better agreement between the experimental and simulated results. These findings highlight the importance of accurately characterizing interaction parameters to achieve reliable CFD-DEM simulations of spouted bed systems.

Förderung

  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil
  • Conselho Nacional de Desenvolvimento Científico e Tecnológico—Brasil

Zitieren

APA

Borges, L. P., Batista, J. N. M., Souza, A. S. E., & Béttega, R. (2026). Experimental Determination of Interaction Parameters for CFD-DEM Modeling of Spouted Bed Hydrodynamics. Dynamics, 6(3), 25. https://doi.org/10.3390/dynamics6030025

Vancouver

Borges LP, Batista JNM, Souza ASE, Béttega R. Experimental Determination of Interaction Parameters for CFD-DEM Modeling of Spouted Bed Hydrodynamics. Dynamics. 2026;6(3):25. doi:10.3390/dynamics6030025

BibTeX
@article{Borges2026,
  author = {Borges, Laira Pinto and Batista, Júnia Natália Mendes and Souza, Amarílis Severino e and Béttega, Rodrigo},
  title = {Experimental Determination of Interaction Parameters for CFD-DEM Modeling of Spouted Bed Hydrodynamics},
  journal = {Dynamics},
  year = {2026},
  volume = {6},
  number = {3},
  pages = {25},
  doi = {10.3390/dynamics6030025}
}
Kostenlos starten →