EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Coffee Temperature and Immersion Duration on the Physicochemical and Mechanical Properties of Orthodontic Elastomeric Chains: An In Vitro Study

Thunwa Binlateh, Paiboon Jitprasertwong, Watita Pochanukul, Pornputthi Puttaravuttiporn, Chidchanok Leethanakul, Peungchaleoy Thammanichanon

Dentistry Journal · 19.11.2026 · 14 (11) · 754

DOI: 10.3390/dj14110754 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 19.11.2026. Verfasst von Thunwa Binlateh und 5 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Suranaree University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

This study aimed to evaluate the effects of coffee temperature and immersion duration on the percentage weight change, force degradation, mechanical properties (300% modulus and strain at break), and surface morphology of orthodontic elastomeric chains. We also aimed to examine the relationship between weight change and force degradation.

Methods

Latex-free closed-type elastomeric chains were stretched to generate a force of 300 gf and assigned to four groups: control (artificial saliva, 37 °C) and three coffee-immersion groups (cold, 4 °C; room temperature, 25 °C; hot, 65 °C). Coffee groups were immersed for 15 min/day and stored in artificial saliva at 37 °C between immersion cycles. Weight change, force degradation, 300% modulus, strain at break, and surface morphology (scanning electron microscopy [SEM]) were evaluated on days 1, 3, 7, 14, and 21 (N = 10/group/time point). Two-way ANOVA with Tukey’s HSD post hoc test was used to analyze the effects of temperature and duration, and Pearson’s correlation was used to assess the relationship between weight change and force degradation.

Results

Weight change was significantly affected by immersion temperature and duration (both p < 0.001), with the hot group showing significantly greater overall weight change than the control group (1.61% vs. 0.87%). Immersion temperature and duration significantly affected 300% modulus and strain at break, with significant temperature–duration interactions (p < 0.001). The hot group showed a consistently higher modulus and lower strain at break than the control group throughout the 21-day period, accompanied by progressively increasing surface irregularity on SEM. Force degradation was significantly greater in the hot group than in all other groups at every time point (p < 0.001) and increased continuously over 21 days, whereas the control, cold-, and room-temperature groups plateaued after days 7–14. Weight change was significantly and positively correlated with force degradation overall (r = 0.332, p < 0.001) and within each temperature group (r = 0.388–0.633), with the strongest correlation observed in the hot group.

Conclusions

Coffee temperature and immersion duration significantly affected the physicochemical and mechanical properties of orthodontic elastomeric chains, with hot-coffee exposure producing the greatest weight change, mechanical stiffening, surface roughening, and force degradation. Weight change was positively associated with force degradation, which suggests a link between physicochemical alteration and mechanical force loss, particularly under hot-temperature exposure.

Förderung

  • Suranaree University of Technology

Zitieren

APA

Binlateh, T., Jitprasertwong, P., Pochanukul, W., Puttaravuttiporn, P., Leethanakul, C., & Thammanichanon, P. (2026). Effects of Coffee Temperature and Immersion Duration on the Physicochemical and Mechanical Properties of Orthodontic Elastomeric Chains: An In Vitro Study. Dentistry Journal, 14(11), 754. https://doi.org/10.3390/dj14110754

Vancouver

Binlateh T, Jitprasertwong P, Pochanukul W, Puttaravuttiporn P, Leethanakul C, Thammanichanon P. Effects of Coffee Temperature and Immersion Duration on the Physicochemical and Mechanical Properties of Orthodontic Elastomeric Chains: An In Vitro Study. Dentistry Journal. 2026;14(11):754. doi:10.3390/dj14110754

BibTeX
@article{Binlateh2026,
  author = {Binlateh, Thunwa and Jitprasertwong, Paiboon and Pochanukul, Watita and Puttaravuttiporn, Pornputthi and Leethanakul, Chidchanok and Thammanichanon, Peungchaleoy},
  title = {Effects of Coffee Temperature and Immersion Duration on the Physicochemical and Mechanical Properties of Orthodontic Elastomeric Chains: An In Vitro Study},
  journal = {Dentistry Journal},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {754},
  doi = {10.3390/dj14110754}
}
Kostenlos starten →