Selective Caries Removal as a Restorative Strategy for Caries Management: Residual Dentin Quality After Chemomechanical and Mechanical Excavation
Dentistry Journal · 08.07.2026 · 14 (7) · 419
DOI: 10.3390/dj14070419 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 08.07.2026. Verfasst von Gustavo Gerardo Ramirez-Martinez und 7 weiteren Autor:innen. Beteiligte Einrichtung: Interdisciplinary Research Laboratory, Nanostructures and Biomaterials Area, National School of Higher Studies (ENES) Leon Unit, National Autonomous …. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background/Objectives: Advances in restorative caries management have shifted operative dentistry from complete caries excavation toward selective, tissue-preserving strategies that maintain remineralizable dentin and support adhesive restoration. Chemomechanical systems and self-limiting burs may reduce unnecessary dentin removal, but their effects on residual dentin quality remain relevant to restorative decision-making. This in vitro study compared Carisolv™, Papacarie®, Smart Burs™, and conventional tungsten carbide burs with respect to caries removal time, residual bacterial load, laser fluorescence, Vickers microhardness, and scanning electron microscopy (SEM) features of residual dentin.
Methods
Forty-eight extracted permanent molars were selected. Standardized class I cavities were prepared and subjected to an artificial caries protocol using a demineralizing solution for 240 h. A cariogenic biofilm model was then established using Streptococcus mutans. Specimens were allocated to four excavation groups: Carisolv™, Papacarie®, Smart Burs™, and conventional carbide burs. Caries removal was performed according to each system, and the operative time was recorded. Residual bacterial contamination was estimated through colony-forming unit counts. Residual dentin was assessed using DIAGNOdent™ laser fluorescence, Vickers microhardness testing, and SEM at multiple magnifications.
Results
Mean removal times were 2.82 ± 1.64 min for Carisolv™, 2.50 ± 1.15 min for Papacarie®, 2.05 ± 0.70 min for Smart Burs™, and 0.61 ± 0.44 min for carbide burs. Residual bacterial growth was detected in all groups. Vickers microhardness values were 79.2 ± 24.66 VHN for Carisolv™, 79.6 ± 22.30 VHN for Papacarie®, 83.4 ± 28.73 VHN for Smart Burs™, and 92.9 ± 24.66 VHN for intact dentin control. SEM revealed dentin morphology closer to the control after carbide bur excavation, partially obliterated tubules after Carisolv™, and more evident tubular obliteration after Papacarie® and Smart Burs™.
Conclusions
Chemomechanical excavation, particularly Carisolv™, generated a residual dentin substrate with microhardness values compatible with a conservative restorative approach, although with longer operative time than conventional burs. The findings support the role of selective caries removal in minimally invasive restorative protocols and highlight the need to connect residual dentin characteristics with adhesive performance, bioactive materials, and long-term restoration outcomes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Interdisciplinary Research Laboratory, Nanostructures and Biomaterials Area, National School of Higher Studies (ENES) Leon Unit, National Autonomous University of Mexico (UNAM), Leon 37684, Mexico.
- Basic Science Laboratory, Autonomous University of San Luis Potosi, San Luis Potosi 78290, Mexico.
- Department of Orthodontics, Dental and Advanced Studies Research Center (CIEAO) "Keisaburo Miyata", Faculty of Dentistry, Autonomous University State of Mexico (UAEMex), Toluca 50130, Mexico.
- School of Dental Medicine, Ponce Health Sciences University, Ponce, PR 00732, USA.
- Department of Restorative Dental Science, College of Dentistry, King Saud University, Riyadh 11545, Saudi Arabia.
- Department of Restorative Dentistry & Prosthodontics, The University of Texas School of Dentistry, Houston, TX 77054, USA.
ORCID-Profile: Christian Andrea Lopez-Ayuso, Rogelio Jose Scougall-Vilchis, Silvia Rojas-Rueda, Carlos A Jurado, Abdulrahman Alshabib, Rene Garcia-Contreras
Zitieren
APA
Ramirez-Martinez, G. G., Lopez-Ayuso, C. A., Scougall-Vilchis, R. J., Rojas-Rueda, S., Jurado, C. A., Alshabib, A., Nurrohman, H., & Garcia-Contreras, R. (2026). Selective Caries Removal as a Restorative Strategy for Caries Management: Residual Dentin Quality After Chemomechanical and Mechanical Excavation. Dentistry Journal, 14(7), 419. https://doi.org/10.3390/dj14070419
Vancouver
Ramirez-Martinez GG, Lopez-Ayuso CA, Scougall-Vilchis RJ, Rojas-Rueda S, Jurado CA, Alshabib A, et al. Selective Caries Removal as a Restorative Strategy for Caries Management: Residual Dentin Quality After Chemomechanical and Mechanical Excavation. Dentistry Journal. 2026;14(7):419. doi:10.3390/dj14070419
BibTeX
@article{RamirezMartinez2026,
author = {Ramirez-Martinez, Gustavo Gerardo and Lopez-Ayuso, Christian Andrea and Scougall-Vilchis, Rogelio Jose and Rojas-Rueda, Silvia and Jurado, Carlos A and Alshabib, Abdulrahman and Nurrohman, Hamid and Garcia-Contreras, Rene},
title = {Selective Caries Removal as a Restorative Strategy for Caries Management: Residual Dentin Quality After Chemomechanical and Mechanical Excavation},
journal = {Dentistry Journal},
year = {2026},
volume = {14},
number = {7},
pages = {419},
doi = {10.3390/dj14070419}
}
EUVIMED