EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Micro-CT-Based Anatomically Accurate Tooth Model for Finite Element Analysis of Composite Restorations

Tamás Tarjányi iD, Balázs Szabó, Lívia Vásárhelyi iD, Tibor Nagy, Ferenc Farkas iD, Attila Nagy iD

Dentistry Journal · 08.05.2026 · 14 (5) · 279

DOI: 10.3390/dj14050279 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 08.05.2026. Verfasst von Tamás Tarjányi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Medical Physics and Informatics, University of Szeged, Korányi Fasor 9, 6720 Szeged, Hungary. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Szeged Open Access Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Finite element analysis (FEA) has become an important tool in restorative dentistry for investigating stress distribution in teeth and dental restorations. However, the accuracy of such analyses strongly depends on the anatomical fidelity of the underlying tooth models, which is often limited in simplified geometries. The objective of this study was to develop an anatomically accurate three-dimensional tooth model based on micro-computed tomography (micro-CT) data and to evaluate the biomechanical behaviour of sound and composite-restored teeth under clinically relevant loading conditions.

Methods

A human tooth was scanned using high-resolution micro-CT imaging. Enamel, dentin, and pulp were segmented and reconstructed into three-dimensional geometries, which were further refined using computer-aided design (CAD) tools. The resulting models were imported into a finite element environment for mechanical simulation. Static loading conditions were applied to both sound and composite-restored tooth models, including a vertical load of 200 N and an oblique load of 200 N applied at a 45° angle to the tooth crown. Von Mises stress distributions were evaluated to characterize stress concentration patterns.

Results

Finite element simulations revealed maximum von Mises stresses of approximately 140 MPa, predominantly localized in the coronal regions of the tooth. Oblique loading produced increased and more asymmetric stress concentrations than vertical loading, particularly in the anterior and posterior crown regions. While overall stress distributions were comparable between sound and composite-restored teeth, locally increased stress levels were observed in restored models under oblique loading.

Conclusions

Anatomically accurate, micro-CT-based finite element tooth models provide a robust framework for biomechanical analysis in restorative dentistry. The presented workflow enables detailed evaluation of stress distribution in composite-restored teeth and may contribute to improved understanding and optimization of restorative materials and treatment strategies.

Schlagwörter

Stichwörter der Autor:innen

3D CADCT scanfinite element analysismechanical stresssimulationteeth

Autor:innen und Institutionen

  • Department of Medical Physics and Informatics, University of Szeged, Korányi Fasor 9, 6720 Szeged, Hungary.
  • Department of Periodontology, Faculty of Dentistry, University of Szeged, Tisza L. Körút 64-66, 6720 Szeged, Hungary.
  • Interdisciplinary Excellence Centre, Department of Applied and Environmental Chemistry, University of Szeged, Rerrich Béla Tér 1, 6720 Szeged, Hungary.
  • ELI ALPS, ELI-HU Non-Profit Ltd., Wolfgang Sandner u. 3, 6728 Szeged, Hungary.
  • Department of Mechanical Engineering, Faculty of Engineering, University of Szeged, Mars Tér. 7, 6724 Szeged, Hungary.

ORCID-Profile: Tamás Tarjányi, Lívia Vásárhelyi, Ferenc Farkas, Attila Nagy

Förderung

  • University of Szeged Open Access Fund

Zitieren

APA

Tarjányi, T., Szabó, B., Vásárhelyi, L., Nagy, T., Farkas, F., & Nagy, A. (2026). Development of Micro-CT-Based Anatomically Accurate Tooth Model for Finite Element Analysis of Composite Restorations. Dentistry Journal, 14(5), 279. https://doi.org/10.3390/dj14050279

Vancouver

Tarjányi T, Szabó B, Vásárhelyi L, Nagy T, Farkas F, Nagy A. Development of Micro-CT-Based Anatomically Accurate Tooth Model for Finite Element Analysis of Composite Restorations. Dentistry Journal. 2026;14(5):279. doi:10.3390/dj14050279

BibTeX
@article{Tarjnyi2026,
  author = {Tarjányi, Tamás and Szabó, Balázs and Vásárhelyi, Lívia and Nagy, Tibor and Farkas, Ferenc and Nagy, Attila},
  title = {Development of Micro-CT-Based Anatomically Accurate Tooth Model for Finite Element Analysis of Composite Restorations},
  journal = {Dentistry Journal},
  year = {2026},
  volume = {14},
  number = {5},
  pages = {279},
  doi = {10.3390/dj14050279}
}
Kostenlos starten →