Color Stability and Wear Behavior of Polished and Glazed Lithium Aluminium Disilicate Hybrid Abutment Crowns: A 3-Year Clinical Pilot Study
Dentistry Journal · 27.04.2026 · 14 (5) · 253
DOI: 10.3390/dj14050253 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 27.04.2026. Verfasst von Jeremias Hey und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics and Geriatric Dentistry, Martin Luther University Halle-Wittenberg, Magdeburger Str. 16, 06112 Halle (Saale), Germany. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ITI International Team for Implantology, International Team for Implantology.
Abstract (Originalsprache)
Objectives
To evaluate the influence of two surface finishing procedures—mechanical polishing and glaze firing—on the color stability and wear behavior of lithium aluminium disilicate (LAD) hybrid abutment crowns over a three-year clinical observation period.
Methods
Twenty-four patients requiring 34 implant-supported single crowns were included in this prospective clinical study. LAD abutment crowns were fabricated using n!ce ceramic and a CAD/CAM workflow and finished either by mechanical polishing (P, n = 17) or glaze firing (G, n = 17). After insertion as well as after one and three years (P: n = 9, G: n = 9) of clinical use color measurements were performed using spectrophotometry, and color differences (ΔE00) were calculated. Wear was assessed by digital surface comparison of baseline and the two follow-up scans using three-dimensional analysis software. Reference teeth (R) were defined and evaluated comparable to the P and F groups. Biological and technical complications were recorded throughout the observation period.
Results
Color deviations increased over time in all groups (P, G, R). After three years, G showed lower mean color differences (ΔE00 ≈ 2.77) compared with F (ΔE00 ≈ 5.40), although the difference was not statistically significant. No significant differences in vertical height loss were observed between P and G. One adhesive fracture occurred both in the P and G group, five crowns (P: n = 3, G: n = 2) developed periimplantitis.
Conclusions
Both polishing and glazing resulted in comparable clinical outcomes regarding color stability, wear behavior, and complication rates. Clinical significance: Both finishing protocols might be a reliable option for LAD hybrid abutment crowns.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthodontics and Geriatric Dentistry, Martin Luther University Halle-Wittenberg, Magdeburger Str. 16, 06112 Halle (Saale), Germany.
ORCID-Profile: Ramona Schweyen
Förderung
- ITI International Team for Implantology
- International Team for Implantology
Zitieren
APA
Hey, J., Griesbach, C. R., Kasaliyska, M., Arnold, C., & Schweyen, R. (2026). Color Stability and Wear Behavior of Polished and Glazed Lithium Aluminium Disilicate Hybrid Abutment Crowns: A 3-Year Clinical Pilot Study. Dentistry Journal, 14(5), 253. https://doi.org/10.3390/dj14050253
Vancouver
Hey J, Griesbach CR, Kasaliyska M, Arnold C, Schweyen R. Color Stability and Wear Behavior of Polished and Glazed Lithium Aluminium Disilicate Hybrid Abutment Crowns: A 3-Year Clinical Pilot Study. Dentistry Journal. 2026;14(5):253. doi:10.3390/dj14050253
BibTeX
@article{Hey2026,
author = {Hey, Jeremias and Griesbach, Carl-Rainer and Kasaliyska, Monika and Arnold, Christin and Schweyen, Ramona},
title = {Color Stability and Wear Behavior of Polished and Glazed Lithium Aluminium Disilicate Hybrid Abutment Crowns: A 3-Year Clinical Pilot Study},
journal = {Dentistry Journal},
year = {2026},
volume = {14},
number = {5},
pages = {253},
doi = {10.3390/dj14050253}
}
EUVIMED