EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Three-Dimensional Displacement Patterns in Maxillary Molar Distalization: A Comparative Finite Element Study

Roland Kmeid iD, Joseph Bouserhal iD, Allahyar Geramy iD, Maria Daccache, Moschos Papadopoulos iD

Dentistry Journal · 23.03.2026 · 14 (3) · 187

DOI: 10.3390/dj14030187 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 23.03.2026. Verfasst von Roland Kmeid und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthodontics, Faculty of Dental Medicine, Saint Joseph University of Beirut, Rue de Damas, Beirut 1107 2180, Lebanon. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

This study aimed to analyze the three-dimensional displacement of maxillary first molars using a finite element model with two headgear configurations, namely cervical and horizontal pull headgears, as well as pendulum, infrazygomatic miniscrews, Bollard miniplates, Advanced Molar Distalization Appliance (AMDA), and Beneslider. The goal was to clarify how variations in anchorage design and force direction influence molar movement across the sagittal, vertical, and transverse planes.

Methods

A three-dimensional finite element model of the maxillary dentition and supporting structures was constructed using reference anatomical data and standardized material properties. Each appliance was virtually simulated under its clinically recommended force magnitude and direction to ensure realistic biomechanical conditions. The orientation of each force vector relative to the molar’s center of resistance (CR) was analyzed, and resulting tooth displacements were quantified along the sagittal (Z), vertical (Y), and transverse (X) axes using 49-node reference paths connecting key anatomical landmarks.

Results

Appliances applying forces through or above the molar CR, such as the AMDA, infrazygomatic miniscrews, and Bollard miniplates, produced nearly bodily distalization with minimal tipping (

Schlagwörter

Stichwörter der Autor:innen

finite element analysisorthodontic anchorage proceduresorthodontic appliancestooth movement

Autor:innen und Institutionen

  • Department of Orthodontics, Faculty of Dental Medicine, Saint Joseph University of Beirut, Rue de Damas, Beirut 1107 2180, Lebanon.
  • Department of Orthodontics, Boston University Henry M. Goldman School of Dental Medicine, 635 Albany Street, Boston, MA 02118, USA.
  • Department of Orthodontics, School of Dentistry, Tehran University of Medical Sciences, North Kargar Street, Tehran 1417614411, Tehran, Iran.
  • Department of Orthodontics, Faculty of Dentistry, School of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Central Macedonia, Greece.

ORCID-Profile: Roland Kmeid, Joseph Bouserhal, Allahyar Geramy, Moschos Papadopoulos

Zitieren

APA

Kmeid, R., Bouserhal, J., Geramy, A., Daccache, M., & Papadopoulos, M. (2026). Three-Dimensional Displacement Patterns in Maxillary Molar Distalization: A Comparative Finite Element Study. Dentistry Journal, 14(3), 187. https://doi.org/10.3390/dj14030187

Vancouver

Kmeid R, Bouserhal J, Geramy A, Daccache M, Papadopoulos M. Three-Dimensional Displacement Patterns in Maxillary Molar Distalization: A Comparative Finite Element Study. Dentistry Journal. 2026;14(3):187. doi:10.3390/dj14030187

BibTeX
@article{Kmeid2026,
  author = {Kmeid, Roland and Bouserhal, Joseph and Geramy, Allahyar and Daccache, Maria and Papadopoulos, Moschos},
  title = {Three-Dimensional Displacement Patterns in Maxillary Molar Distalization: A Comparative Finite Element Study},
  journal = {Dentistry Journal},
  year = {2026},
  volume = {14},
  number = {3},
  pages = {187},
  doi = {10.3390/dj14030187}
}
Kostenlos starten →