EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Characterization of Zirconia–Silica PMMA Nanocomposite for Endodontic Implants

Puji Widodo, Wawan Mulyawan, Nina Djustiana, I Made Joni iD

Dentistry Journal · 22.02.2023 · 11 (3) · 57

DOI: 10.3390/dj11030057 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 22.02.2023. Verfasst von Puji Widodo und 3 weiteren Autor:innen. Beteiligte Einrichtung: Dentistry Department, Post Graduate School, Faculty of Dentistry, Universitas Padjadjaran, Jalan Sekeloa Selatan 1, Bandung 40132, Indonesia. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of the Defence Republic of Indonesia, Padjadjaran University, Ministry of the Defence, Republic of Indonesia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to enhance the mechanical properties of PMMA composites by introducing various types of fillers, including ZrO2, SiO2, and a mixture of ZrO2-SiO2 nanoparticles, which were prepared as prototypes for an endodontic implant. The ZrO2, SiO2, and mixed ZrO2-SiO2 nanoparticles were synthesized using the sol–gel method and the precursors Tetraethyl Orthosilicate, Zirconium Oxychloride, and a mixture of both precursors, respectively. Before polymerization, the as-synthesized powders were subjected to the bead milling process to obtain a well-dispersed suspension. Two scenarios for the fillers were implemented in the preparation of the PMMA composite: a mixture of ZrO2/SiO2 and ZrO2-SiO2 mixed with two different types of silane: (3-Mercaptopropyl) trimethoxysilane (MPTS) and 3-(Trimethoxysilyl) Propyl Methacrylate (TMSPMA). The observation of the characteristics of all of the investigated fillers included the use of a particle-size analyzer (PSA), a Zeta-potential analyzer, FTIR, XRF, XRD, and SEM. The mechanical properties of the MMA composites, as prepared under various scenarios, were observed in terms of their flexural strength, diametrical tensile strength (DTS), and modulus of elasticity (ME). These levels of performance were compared with a PMMA-only polymer. Each sample was measured five times for flexural strength, DTS, and ME. The results showed that the best PMMA composite was SiO2/ZrO2/TMSPMA, as revealed by measurements of the flexural strength, DTS, and ME corresponding to 152.7 ± 13.0 MPa, 51.2 ± 0.6 MPa, and 9272.8 ± 2481.4 MPa, which are close to the mechanical properties of dentin. The viability of these PMMA composites, as measured up to day 7, was 93.61%, indicating that they are nontoxic biomaterials. Therefore, it was concluded that the PMMA composite created with SiO2/ZrO2/TMSPMA can be considered to be an acceptable endodontic implant.

Schlagwörter

Stichwörter der Autor:innen

PMMAendodontic implantsilicazirconia

Autor:innen und Institutionen

  • Dentistry Department, Post Graduate School, Faculty of Dentistry, Universitas Padjadjaran, Jalan Sekeloa Selatan 1, Bandung 40132, Indonesia.
  • Functional Nano Powder University Center of Excellence, Universitas Padjadjaran, Jalan Raya Bandung-Sumedang KM 21, Jatinangor, Sumedang 45363, Indonesia.
  • Department of Community Medicine, Faculty of Medicine, Universitas Indonesia, Jalan Pegangsaan Timur 16, Cikini, Jakarta Pusat 10310, Indonesia.
  • Department of Dental Materials Science and Technology, Faculty of Dentistry, Universitas Padjadjaran, Jalan Raya Bandung-Sumedang KM 21, Jatinangor, Sumedang 45363, Indonesia.
  • Department of Physics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Jalan Raya Bandung-Sumedang KM 21, Jatinangor, Sumedang 45363, Indonesia.

ORCID-Profile: I Made Joni

Förderung

  • Ministry of the Defence Republic of Indonesia
  • Padjadjaran University
  • Ministry of the Defence, Republic of Indonesia
  • Academic Leadership Grant, Padjadjaran University

Zitieren

APA

Widodo, P., Mulyawan, W., Djustiana, N., & Joni, I. M. (2023). Synthesis and Characterization of Zirconia–Silica PMMA Nanocomposite for Endodontic Implants. Dentistry Journal, 11(3), 57. https://doi.org/10.3390/dj11030057

Vancouver

Widodo P, Mulyawan W, Djustiana N, Joni IM. Synthesis and Characterization of Zirconia–Silica PMMA Nanocomposite for Endodontic Implants. Dentistry Journal. 2023;11(3):57. doi:10.3390/dj11030057

BibTeX
@article{Widodo2023,
  author = {Widodo, Puji and Mulyawan, Wawan and Djustiana, Nina and Joni, I Made},
  title = {Synthesis and Characterization of Zirconia–Silica PMMA Nanocomposite for Endodontic Implants},
  journal = {Dentistry Journal},
  year = {2023},
  volume = {11},
  number = {3},
  pages = {57},
  doi = {10.3390/dj11030057}
}
Kostenlos starten →