Design and Manufacturing Process of a New Type of Deep-Sea Spherical Pressure Hull Structure
Designs · 11.01.2023 · 7 (1) · 12
DOI: 10.3390/designs7010012 ↗Kurz gefasst
Fachartikel in der Zeitschrift Designs, online erschienen am 11.01.2023. Verfasst von Yang Jing und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Spherical shell structures are the most suitable shape for deep-sea pressure hulls because they have ideal mechanical properties for handling symmetrical pressure. However, the shape accuracy requirement for a hull in a spherical shell structure subjected to deep-sea pressure is extremely high. Even minor asymmetry can significantly degrade its mechanical properties. In this study, a new type of spherical deep-sea pressure hull structure and its integral hydro-bulge-forming (IHBF) method are proposed. First, 32 flat metal plate parts are prepared and welded along their straight sides to form a regular polygonally shaped box. Next, water pressure is applied inside the preformed box to create a spherical pressure vessel. We performed a forming experiment using a spherical pressure vessel with a design radius of 250 mm as a verification research object. The radius of the spherical pressure vessel obtained from the forming experiment is 249.32 mm, the error from the design radius is 0.27%, and the roundness of the spherical surface is 2.36 mm. We performed a crushing analysis using uniform external pressure to confirm the crushing and buckling characteristics of the formed spherical pressure vessel. The results show that the work-hardening increased the crushing and buckling load of the spherical pressure vessel, above that of the conventional spherical shell structure. Additionally, it is established that local defects and the size of the weld line significantly and slightly affected the crushing and buckling load of the spherical pressure hull, respectively.
Zitieren
APA
Jing, Y., Kong, C., Guan, J., Zhao, W., Fukuchi, A., & Zhao, X. (2023). Design and Manufacturing Process of a New Type of Deep-Sea Spherical Pressure Hull Structure. Designs, 7(1), 12. https://doi.org/10.3390/designs7010012
Vancouver
Jing Y, Kong C, Guan J, Zhao W, Fukuchi A, Zhao X. Design and Manufacturing Process of a New Type of Deep-Sea Spherical Pressure Hull Structure. Designs. 2023;7(1):12. doi:10.3390/designs7010012
BibTeX
@article{Jing2023,
author = {Jing, Yang and Kong, Chenghai and Guan, Jingchao and Zhao, Wei and Fukuchi, Apollo and Zhao, Xilu},
title = {Design and Manufacturing Process of a New Type of Deep-Sea Spherical Pressure Hull Structure},
journal = {Designs},
year = {2023},
volume = {7},
number = {1},
pages = {12},
doi = {10.3390/designs7010012}
}
EUVIMED