A Coupled-Line Marchand Balun with Symmetric Inductive Compensation for High-Impedance Transformation
Designs · 11.11.2026 · 10 (6) · 128
DOI: 10.3390/designs10060128 ↗Kurz gefasst
Fachartikel in der Zeitschrift Designs, online erschienen am 11.11.2026. Verfasst von Jitjark Nualkham und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nakhon Phanom University.
Abstract (Originalsprache)
This paper presents a single-layer coupled-line Marchand balun designed for a nominal transformation from a 50-Ω unbalanced source to a 300-Ω differential load at 2.25 GHz. The circuit combines two inductively terminated coupled-line sections with an independent input matching network. Symmetric termination inductors provide a means of tuning the coupled-line response without introducing additional cascaded sections. The design was developed using even- and odd-mode transmission-line analysis and optimized in Keysight Advanced Design System (ADS). Conventional and compensated prototypes were fabricated for comparison. At 2.25 GHz, the compensated prototype yielded a reported input reflection level of −28.05 dB, with output transmission levels of −3.11 and −3.05 dB. Its reported amplitude imbalance was 0.052 dB, and the output phase difference was 180.52∘ (0.52∘ phase error). The corresponding conventional prototype exhibited an input reflection level of −21.51 dB, an amplitude imbalance of 0.217 dB, and a phase error of 9.29∘. The results indicate improved balance and input matching at the design frequency. Because the retained records do not establish whether the VNA data were renormalized from physical 50-Ω ports to the intended 150-Ω output references, the measurements cannot independently confirm the differential impedance transformation. Full-band performance, common-mode rejection, and circuit-area advantages are therefore not quantified.
Förderung
- Nakhon Phanom University
Zitieren
APA
Nualkham, J., Chomchalao, C., Phromloungsri, R., Angkawisittpan, N., & Sonasang, S. (2026). A Coupled-Line Marchand Balun with Symmetric Inductive Compensation for High-Impedance Transformation. Designs, 10(6), 128. https://doi.org/10.3390/designs10060128
Vancouver
Nualkham J, Chomchalao C, Phromloungsri R, Angkawisittpan N, Sonasang S. A Coupled-Line Marchand Balun with Symmetric Inductive Compensation for High-Impedance Transformation. Designs. 2026;10(6):128. doi:10.3390/designs10060128
BibTeX
@article{Nualkham2026,
author = {Nualkham, Jitjark and Chomchalao, Chaiya and Phromloungsri, Ravee and Angkawisittpan, Niwat and Sonasang, Somchat},
title = {A Coupled-Line Marchand Balun with Symmetric Inductive Compensation for High-Impedance Transformation},
journal = {Designs},
year = {2026},
volume = {10},
number = {6},
pages = {128},
doi = {10.3390/designs10060128}
}
EUVIMED