Computational Analysis of Tricuspid Heart Valves
Designs · 19.05.2026 · 10 (3) · 57
DOI: 10.3390/designs10030057 ↗Kurz gefasst
Fachartikel in der Zeitschrift Designs, online erschienen am 19.05.2026. Verfasst von Samikshya Neupane und 1 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Understanding the mechanical behavior of valve materials and the hemodynamic characteristics of blood flow is important for improving prosthetic heart valve design. In this study, a comprehensive computational investigation was conducted to evaluate the biomechanical and hemodynamic behavior of a three-dimensional tricuspid valve model constructed from reported prosthetic valve geometries. The structural response of the valve was evaluated using linear elastic, viscoelastic, and hyperelastic constitutive models for four different materials: pyrolytic carbon, polyurethane, porcine tissue, and bovine tissue. The results demonstrated clear material-dependent trends. Pyrolytic carbon exhibited negligible deformation (1.7166 × 10−8 m), confirming its rigid mechanical behavior, whereas biological tissues showed greater compliance, with the largest deformation observed for the bovine hyperelastic model (9.6837 × 10−5 m). Hyperelastic tissue models produced lower peak von Mises stresses (1.3951 × 104–1.8603 × 104 Pa) than the corresponding linear elastic tissue models (2.6842 × 104–2.7017 × 104 Pa), indicating improved stress redistribution under nonlinear deformation. Polyurethane showed intermediate mechanical behavior, with moderate deformation and lower stress under viscoelastic modeling than under the linear elastic assumption, suggesting its potential as a polymeric alternative to traditional valve materials. The Computational Fluid Dynamics (CFD) analysis of the rigid open valve geometry revealed a central velocity jet with a peak velocity of approximately 0.092 m/s, localized vortex formation with a maximum vorticity magnitude of about 177 s−1 and a peak instantaneous wall shear stress of 1.32 Pa near the leaflet edges and valve opening. Overall, the results highlight the trade-off between rigidity, compliance, and durability among prosthetic valve materials and suggest that polyurethane may provide a balanced alternative for tricuspid valve replacement.
Zitieren
APA
Neupane, S., & Goswami, T. (2026). Computational Analysis of Tricuspid Heart Valves. Designs, 10(3), 57. https://doi.org/10.3390/designs10030057
Vancouver
Neupane S, Goswami T. Computational Analysis of Tricuspid Heart Valves. Designs. 2026;10(3):57. doi:10.3390/designs10030057
BibTeX
@article{Neupane2026,
author = {Neupane, Samikshya and Goswami, Tarun},
title = {Computational Analysis of Tricuspid Heart Valves},
journal = {Designs},
year = {2026},
volume = {10},
number = {3},
pages = {57},
doi = {10.3390/designs10030057}
}
EUVIMED