Epitaxial Orientation Transfer and Interfacial Stray-Grain Formation During Heterogeneous Seeding of DD419 Single-Crystal Superalloy with Ni-20W Seeds
Crystals · 04.11.2026 · 16 (11) · 705
DOI: 10.3390/cryst16110705 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 04.11.2026. Verfasst von Xiaoyi Gong und 8 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shenzhen Science and Technology Program, Guangdong Innovative and Entrepreneurial Research Team Program.
Abstract (Originalsprache)
Ni-W alloys are promising heterogeneous seed materials for directional solidification of Ni-based single-crystal superalloys. In this study, Ni-20 wt.% W (Ni-20W) seeds were used to initiate DD419 castings. Their solidification characteristics, melt-back behavior, interfacial microstructure, and orientation transfer were compared with those of DD419 homogeneous seeds. In two thermal cycles, Ni-20W had liquidus temperatures of 1492.6 and 1493.6 °C, with a critical nucleation undercooling of 14.5 °C in both cycles. DD419 had liquidus temperatures of 1388.8 and 1394.1 °C and undercoolings of 44 and 37 °C, respectively. Metallography and paired Laue measurements of one plate casting were consistent with orientation inheritance from Ni-20W to DD419. The software-reported differences in Theta and Alpha were 0.2° and 2.7°, respectively; the software-reported R value was 3.52. In the same-batch turbine-blade comparison, visible interfacial stray grains were observed on the examined starter-region surfaces of all six Ni-20W-seeded blades. No comparable features were observed on the examined surfaces of the three DD419 homogeneous-seeded blades. The maximum observed melt-back lengths were approximately 12 mm for Ni-20W and 45 mm for DD419. These observations indicate that orientation inheritance in the plate specimen did not ensure a defect-free starter region in the blade comparison. The two seed materials also showed markedly different melt-back behavior under the same nominal casting schedule.
Förderung
- Shenzhen Science and Technology Program
- Guangdong Innovative and Entrepreneurial Research Team Program
Zitieren
APA
Gong, X., Lu, M., Chen, C., Zhao, Y., Ma, D., Wei, J., Xu, W., Li, L., & Deng, Y. (2026). Epitaxial Orientation Transfer and Interfacial Stray-Grain Formation During Heterogeneous Seeding of DD419 Single-Crystal Superalloy with Ni-20W Seeds. Crystals, 16(11), 705. https://doi.org/10.3390/cryst16110705
Vancouver
Gong X, Lu M, Chen C, Zhao Y, Ma D, Wei J, et al. Epitaxial Orientation Transfer and Interfacial Stray-Grain Formation During Heterogeneous Seeding of DD419 Single-Crystal Superalloy with Ni-20W Seeds. Crystals. 2026;16(11):705. doi:10.3390/cryst16110705
BibTeX
@article{Gong2026,
author = {Gong, Xiaoyi and Lu, Min and Chen, Chen and Zhao, Yunxing and Ma, Dexin and Wei, Jianhui and Xu, Weitai and Li, Lv and Deng, Yangpi},
title = {Epitaxial Orientation Transfer and Interfacial Stray-Grain Formation During Heterogeneous Seeding of DD419 Single-Crystal Superalloy with Ni-20W Seeds},
journal = {Crystals},
year = {2026},
volume = {16},
number = {11},
pages = {705},
doi = {10.3390/cryst16110705}
}
EUVIMED