Parameter Screening and Optimization for DL-Methionine Cooling Crystallization Using Response Surface Methodology
Crystals · 11.08.2026 · 16 (8) · 526
DOI: 10.3390/cryst16080526 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 11.08.2026. Verfasst von Hetao Huang und 5 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Research Program of Chongqing Municipal Education Commission.
Abstract (Originalsprache)
Cooling crystallization of DL-methionine requires the joint control of crystallization yield and bulk density because operating conditions that favor one response may impair the other. Here, single-factor experiments, Plackett–Burman screening, and a three-factor Box–Behnken response-surface design were combined to identify a local operating window. Stirring speed, crystallization time, and solution pH were retained for response-surface modeling. The quadratic models for crystallization yield and bulk density were significant, with R2 values of 0.9910 and 0.9892, respectively, and nonsignificant lack-of-fit terms. Multi-response optimization selected a stirring speed of approximately 332 r/min, a crystallization time of 1.47 h, and a pH of 5.55. Three validation experiments produced yields of 48.98–49.57% and bulk densities of 0.2925–0.3035 g/mL, with relative errors below 5% compared with the model predictions. X-ray diffraction showed no detectable change in the principal DL-methionine crystal phase across representative products. X-ray photoelectron spectroscopy further showed closely matched near-surface C 1s, N 1s, O 1s, and S 2p features between the raw material and the product obtained under the optimized conditions. The sodium nitroprusside assay gave total methionine contents of 99.64–99.79% for the raw material and five representative products; for the model-selected product, the colorimetric result (99.79%) agreed with the amino acid analyzer result (99.93%) to within 0.14%. The combined PB–BBD/RSM workflow therefore supports local parameter selection within the tested design space while maintaining the principal crystal phase, near-surface chemical-state profile, and total methionine content of the recovered product.
Förderung
- Science and Technology Research Program of Chongqing Municipal Education Commission
Zitieren
APA
Huang, H., Gao, M., Liu, Z., Chen, G., Jiang, C., & Cheng, Z. (2026). Parameter Screening and Optimization for DL-Methionine Cooling Crystallization Using Response Surface Methodology. Crystals, 16(8), 526. https://doi.org/10.3390/cryst16080526
Vancouver
Huang H, Gao M, Liu Z, Chen G, Jiang C, Cheng Z. Parameter Screening and Optimization for DL-Methionine Cooling Crystallization Using Response Surface Methodology. Crystals. 2026;16(8):526. doi:10.3390/cryst16080526
BibTeX
@article{Huang2026,
author = {Huang, Hetao and Gao, Mingfei and Liu, Zhengju and Chen, Guanyu and Jiang, Chaoli and Cheng, Zhiliang},
title = {Parameter Screening and Optimization for DL-Methionine Cooling Crystallization Using Response Surface Methodology},
journal = {Crystals},
year = {2026},
volume = {16},
number = {8},
pages = {526},
doi = {10.3390/cryst16080526}
}
EUVIMED