EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of the Mechanical Properties of Cr/CrN/CrAlN Hard Coating Deposited on Special AlSiMgCu Alloy

Vasiliy Chitanov, Boyan Dochev, Desislava Dimova, Ekaterina Zlatareva, Stefan Kolchev, Tetiana Cholakova, Denis Faik, Lilyana Kolaklieva, Roumen Kakanakov, Teodor Solakov

Crystals · 14.06.2026 · 16 (6) · 390

DOI: 10.3390/cryst16060390 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 14.06.2026. Verfasst von Vasiliy Chitanov und 9 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, a non-standardized hypereutectic aluminum–silicon alloy AlSi21Cu5MgCr intended for the automotive industry is presented. The modification of the alloy is performed with the conventional modifier phosphorus in an amount of 0.04 wt%. The applied metallurgical treatment is the basis for the obtained modified structure. It has been established that after conducting the T6 heat treatment, the free silicon crystals are reduced to 26.9 µm, and the eutectic silicon crystals are spherical in shape and have dimensions not exceeding 8 µm. The macrohardness of the studied alloy is 168.5HV10/10, a value significantly higher than that required for this type of alloy, which is in the range of 95 ÷ 137 HV (90 ÷ 130 HB). The microhardness of the α-phase in the composition of the eutectic is 154 µHV50/10, which indicates that after quenching a saturated solid solution was fixed, and during the artificial aging process secondary strengthening phases were formed and separated. A CrAlN hard coating was deposited on the alloy surface. The mechanical properties of the coating were characterized by a hardness of 14 GPa, whereas the AlSi21Cu5MgCr substrate had a hardness of 2 GPa. The results showed considerable improvement of the hardness of the new alloy and well-tuned elastic–plastic properties. The obtained adhesive properties are compatible with this class of materials. The composition of the CrAlN hard coating is homogeneously distributed on the alloy surface and the morphology is improved. The investigations showed that CrAlN hard coatings could successfully be applied for the modification of the surface of AlSIMgCu alloys.

Zitieren

APA

Chitanov, V., Dochev, B., Dimova, D., Zlatareva, E., Kolchev, S., Cholakova, T., Faik, D., Kolaklieva, L., Kakanakov, R., & Solakov, T. (2026). Investigation of the Mechanical Properties of Cr/CrN/CrAlN Hard Coating Deposited on Special AlSiMgCu Alloy. Crystals, 16(6), 390. https://doi.org/10.3390/cryst16060390

Vancouver

Chitanov V, Dochev B, Dimova D, Zlatareva E, Kolchev S, Cholakova T, et al. Investigation of the Mechanical Properties of Cr/CrN/CrAlN Hard Coating Deposited on Special AlSiMgCu Alloy. Crystals. 2026;16(6):390. doi:10.3390/cryst16060390

BibTeX
@article{Chitanov2026,
  author = {Chitanov, Vasiliy and Dochev, Boyan and Dimova, Desislava and Zlatareva, Ekaterina and Kolchev, Stefan and Cholakova, Tetiana and Faik, Denis and Kolaklieva, Lilyana and Kakanakov, Roumen and Solakov, Teodor},
  title = {Investigation of the Mechanical Properties of Cr/CrN/CrAlN Hard Coating Deposited on Special AlSiMgCu Alloy},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {390},
  doi = {10.3390/cryst16060390}
}
Kostenlos starten →