EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Phase Transformation and Hydrogen Embrittlement Assessment in Pre-Strained 316L Austenitic Stainless Steel Sheets

Stavroula Maritsa, Maciej Szczerba, Magdalena Bieda, Joanna Wojewoda-Budka, Theodore Steriotis, Christos Tampaxis, Anna D. Zervaki

Crystals · 11.06.2026 · 16 (6) · 385

DOI: 10.3390/cryst16060385 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 11.06.2026. Verfasst von Stavroula Maritsa und 6 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Marine transportation and storage of liquid hydrogen (LH2) has gained increasing interest, while potential LH2 membrane-type tanks could utilize 316L corrugated austenitic stainless-steel sheets. The corrugation process results in a strain-induced martensitic transformation in the material, introducing rapid diffusion pathways for hydrogen atoms and promoting the formation of hydrogen-trapping sites that alter hydrogen transport and reduce the material’s resistance to hydrogen embrittlement. In this study, 316L sheets were subjected to different levels of uniaxial pre-strain (10, 20, 30, and 40%) with two different strain-rates, to replicate the varying degrees of pre-deformation caused by the corrugation. Microstructural analysis using Electron Backscatter Diffraction (EBSD) (Thermo Fisher Scientific, Waltham, MA, USA) and X-Ray Diffraction (XRD) (Bruker, Billerica, MA, USA) combined with quantitative phase analysis using the Rietveld Method on XRD data, provided valuable insights into the induced phase transformations. Cathodic hydrogen charging method was implemented on as-received and pre-strained material, followed by slow strain rate tensile testing (SSRT) and thermal desorption spectroscopy (TDS) to examine the hydrogen effect on each condition. Experimental results indicated that although 316L exhibits considerable phase stability, it undergoes strain-induced phase transformation resulting in a significant amount of martensite, reaching 5% in the 40% pre-strained condition. Pre-deformation increased hydrogen embrittlement, as evidenced by fractographic analysis which indicated a Relative Reduction of Area (RRA) of 0.83, and by increased hydrogen uptake. These findings contribute to a better understanding of phase transformations and the role of hydrogen in austenitic stainless steels.

Förderung

  • European Commission

Zitieren

APA

Maritsa, S., Szczerba, M., Bieda, M., Wojewoda-Budka, J., Steriotis, T., Tampaxis, C., & Zervaki, A. D. (2026). Phase Transformation and Hydrogen Embrittlement Assessment in Pre-Strained 316L Austenitic Stainless Steel Sheets. Crystals, 16(6), 385. https://doi.org/10.3390/cryst16060385

Vancouver

Maritsa S, Szczerba M, Bieda M, Wojewoda-Budka J, Steriotis T, Tampaxis C, et al. Phase Transformation and Hydrogen Embrittlement Assessment in Pre-Strained 316L Austenitic Stainless Steel Sheets. Crystals. 2026;16(6):385. doi:10.3390/cryst16060385

BibTeX
@article{Maritsa2026,
  author = {Maritsa, Stavroula and Szczerba, Maciej and Bieda, Magdalena and Wojewoda-Budka, Joanna and Steriotis, Theodore and Tampaxis, Christos and Zervaki, Anna D.},
  title = {Phase Transformation and Hydrogen Embrittlement Assessment in Pre-Strained 316L Austenitic Stainless Steel Sheets},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {385},
  doi = {10.3390/cryst16060385}
}
Kostenlos starten →