Partitioning Temperature Dependence of Microstructure and Mechanical Property Balance in Q-P-Treated 300M Steel
Crystals · 01.06.2026 · 16 (6) · 364
DOI: 10.3390/cryst16060364 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 01.06.2026. Verfasst von Jing Ma und 5 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific Research Project of Shaanxi Provincial Department of Education, Shaanxi Provincial University Youth Innovation Team.
Abstract (Originalsprache)
300M ultra-high-strength steel for critical load-bearing components such as aircraft landing gear requires a better balance of strength, ductility, and toughness. However, the effect of partitioning temperature on the microstructural evolution and mechanical property balance of Q-P-treated 300M steel under a fixed interrupted quenching condition remains unclear. In this work, 300M steel was subjected to quenching–partitioning treatment with interrupted quenching at 220 °C for 300 s, followed by partitioning at 250–400 °C for 1 h. As the partitioning temperature increased, the yield strength and ultimate tensile strength decreased from 1599 MPa to 1499 MPa and from 1987 MPa to 1801 MPa, respectively, whereas the elongation to failure and impact toughness increased from 11.52% to 16.50% and from 240 kJ·m−2 to 271 kJ·m−2. The microstructure remained lath-martensitic throughout, while higher partitioning temperature promoted martensite recovery, reduced dislocation density, and caused precipitate coarsening. Retained austenite remained mainly between martensite laths and exhibited both morphology variation and a non-monotonic diffraction response. Within the investigated window, partitioning at 350 °C gave the most favorable combination of strength, ductility, and impact toughness. These results establish the partitioning temperature dependence of microstructural evolution and mechanical property balance in Q-P-treated 300M steel, and provide guidance for heat treatment optimization.
Förderung
- Scientific Research Project of Shaanxi Provincial Department of Education
- Shaanxi Provincial University Youth Innovation Team
Zitieren
APA
Ma, J., Gong, X., Zhang, M., Ma, A., Zhou, C., & Zhang, A. (2026). Partitioning Temperature Dependence of Microstructure and Mechanical Property Balance in Q-P-Treated 300M Steel. Crystals, 16(6), 364. https://doi.org/10.3390/cryst16060364
Vancouver
Ma J, Gong X, Zhang M, Ma A, Zhou C, Zhang A. Partitioning Temperature Dependence of Microstructure and Mechanical Property Balance in Q-P-Treated 300M Steel. Crystals. 2026;16(6):364. doi:10.3390/cryst16060364
BibTeX
@article{Ma2026,
author = {Ma, Jing and Gong, Xiaotao and Zhang, Minhua and Ma, Anbo and Zhou, Chao and Zhang, Aiqin},
title = {Partitioning Temperature Dependence of Microstructure and Mechanical Property Balance in Q-P-Treated 300M Steel},
journal = {Crystals},
year = {2026},
volume = {16},
number = {6},
pages = {364},
doi = {10.3390/cryst16060364}
}
EUVIMED