A Novel Cutting Force Prediction Model and Damage Analysis of Laser-Assisted Cutting CFRP at 135° Cutting Angle
Crystals · 21.05.2026 · 16 (5) · 354
DOI: 10.3390/cryst16050354 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 21.05.2026. Verfasst von Xiaole Liu und 5 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Liaoning Provincial Natural Science Foundation, Foundation of Key Laboratory of Rapid Development & Manufacturing Technology for Aircraft, Liaoning Provincial Department of Education Project.
Abstract (Originalsprache)
Carbon fiber-reinforced polymer (CFRP) composites are widely employed in the aerospace industry due to their excellent properties such as high specific strength and corrosion resistance. However, the delamination and tearing of composites are prone to occur in the machining of CFRP, which significantly affect its performance. The existing laser-assisted cutting model generally simplifies the machining process into high-temperature conventional cutting, and only reflects the thermal effect by modifying the material parameters. The core selective ablation characteristics of laser–CFRP interaction are completely ignored, and the unique mechanical behavior of bare fiber under a large cutting angle is not modeled, and the quantitative correlation between cutting force evolution and machining damage is lacking. In this study, an innovative method of partially exposing fibers is proposed to simulate laser-assisted machining. A micromechanical model is developed to analyze the removal mechanisms of different phases during CFRP processing, and a cutting force prediction model from the micro to macro scale is also established. At the micro-scale, a micromechanical model for fiber cutting in orthogonal machining of CFRP is constructed based on the elastic foundation beam theory. The results show that the proposed cutting force prediction model has high reliability, and the relative error between the predicted value and the experimental measured value is only 7.81%~8.99%. All experiments were repeated three times. Statistical analysis showed that the repeatability of the results was excellent. Compared with conventional cutting, laser-assisted cutting fundamentally changed the failure mode of the fiber from matrix-constrained crushing fracture to controllable free-end large-deflection bending fracture. This transformation leads to a smoother and more regular fiber fracture surface, which effectively inhibits fiber breakage, matrix tearing, and fiber–matrix interface debonding. Quantitative analysis confirms that under laser-assisted processing conditions, the matrix tearing length is positively linearly correlated with the cutting depth, cutting speed, and bare fiber length.
Förderung
- Liaoning Provincial Natural Science Foundation
- Foundation of Key Laboratory of Rapid Development & Manufacturing Technology for Aircraft
- Liaoning Provincial Department of Education Project
- Project for Top-notch Young Talents of Liaoning Province
Zitieren
APA
Liu, X., Kong, X., Cui, H., Wang, M., Zhuang, X., & Li, J. (2026). A Novel Cutting Force Prediction Model and Damage Analysis of Laser-Assisted Cutting CFRP at 135° Cutting Angle. Crystals, 16(5), 354. https://doi.org/10.3390/cryst16050354
Vancouver
Liu X, Kong X, Cui H, Wang M, Zhuang X, Li J. A Novel Cutting Force Prediction Model and Damage Analysis of Laser-Assisted Cutting CFRP at 135° Cutting Angle. Crystals. 2026;16(5):354. doi:10.3390/cryst16050354
BibTeX
@article{Liu2026,
author = {Liu, Xiaole and Kong, Xianjun and Cui, Han and Wang, Minghai and Zhuang, Xin and Li, Jianfeng},
title = {A Novel Cutting Force Prediction Model and Damage Analysis of Laser-Assisted Cutting CFRP at 135° Cutting Angle},
journal = {Crystals},
year = {2026},
volume = {16},
number = {5},
pages = {354},
doi = {10.3390/cryst16050354}
}
EUVIMED