Processing Route Dependence of Microstructure and Mechanical Properties in an Al-Li-Mg Alloy for Lightweight Sports Equipment
Crystals · 18.05.2026 · 16 (5) · 340
DOI: 10.3390/cryst16050340 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 18.05.2026. Verfasst von Ge Liu und 6 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Large Aircraft Advanced Materials Innovation Alliance Project.
Abstract (Originalsprache)
The pursuit of lightweight, high-performance sports equipment drives the development of Al-Li-Mg alloys, yet systematic studies linking a complete processing route, from as-cast to peak-aged condition, to microstructural evolution and mechanical properties remain limited. This work provides the first comprehensive investigation of how a sequential processing route (homogenization, hot rolling, solution treatment, and peak aging) transforms the coarse as-cast structure of an Al-Li-Mg alloy into a refined, recrystallized grain architecture with a uniform dispersion of nanoscale δ′-Al3Li precipitates. This microstructural transformation leads to a dramatic enhancement in mechanical properties: the peak-aged alloy exhibits increases of approximately 92%, 139%, and 925% in yield strength, ultimate tensile strength, and elongation, respectively, relative to the as-cast condition. The dominant strengthening mechanism is identified as dislocation shearing of coherent δ′-Al3Li precipitates (average radius ~5 nm, well below the ~25 nm transition threshold for Orowan looping), which enhances strength without compromising ductility, demonstrating the critical role of the processing route in tailoring microstructures and mechanical properties for lightweight sports equipment.
Förderung
- Large Aircraft Advanced Materials Innovation Alliance Project
Zitieren
APA
Liu, G., Zhang, S., Zhu, Y., Li, X., Zhao, Y., Yin, D., & Zhao, M. (2026). Processing Route Dependence of Microstructure and Mechanical Properties in an Al-Li-Mg Alloy for Lightweight Sports Equipment. Crystals, 16(5), 340. https://doi.org/10.3390/cryst16050340
Vancouver
Liu G, Zhang S, Zhu Y, Li X, Zhao Y, Yin D, et al. Processing Route Dependence of Microstructure and Mechanical Properties in an Al-Li-Mg Alloy for Lightweight Sports Equipment. Crystals. 2026;16(5):340. doi:10.3390/cryst16050340
BibTeX
@article{Liu2026,
author = {Liu, Ge and Zhang, Shenchen and Zhu, Yuncheng and Li, Xin and Zhao, Yingchao and Yin, Dengfeng and Zhao, Ming-Chun},
title = {Processing Route Dependence of Microstructure and Mechanical Properties in an Al-Li-Mg Alloy for Lightweight Sports Equipment},
journal = {Crystals},
year = {2026},
volume = {16},
number = {5},
pages = {340},
doi = {10.3390/cryst16050340}
}
EUVIMED