EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dry Sliding Tribology of γ-TiAl-Based Alloys

Steven Magogodi, Maria Ntsoaki Mathabathe, Charles Witness Siyasiya, Amogelang Sylvester Bolokang, Michael Oluwatosin Bodunrin, Mbavhalelo Maumela

Crystals · 30.03.2026 · 16 (4) · 228

DOI: 10.3390/cryst16040228 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 30.03.2026. Verfasst von Steven Magogodi und 5 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation in South Africa under the Competitive Support Grant.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Incorporating TiAl alloys in engine applications offers benefits including reduced fuel consumption and improved efficiency. However, understanding the wear behaviour of these materials is an important consideration due to their use in harsh environments involving movable parts. This study investigated the wear behaviour and mechanisms of Ti–48Al–2Nb–0.3Si-1Sn (TiAl–S1) together with Ti–48Al–2Nb–0.3Si (TiAl–S0) as a reference alloy against an alumina ball. Scanning electron microscopy (SEM) analysis showed that the addition of Sn refined the lamellar structure from 216 μm to 130 μm and promoted more uniform deformation. SEM observations also indicated that abrasive wear is the dominant mechanism in the TiAl alloys. The TiAl–S1 exhibited lower hardness, resulting in deformation of wear debris and promoting third body acting as a lubricant. SEM-EDS revealed that the tribo-layer and wear debris originated from the TiAl materials rather than the counterpart alumina material. Both alloys demonstrated noble wear resistance, with a wear rate of 7.542 × 10−6 mm3/Nm for TiAl–S1 and 6.729 × 10−6 mm3/Nm for TiAl–S0. Even though both TiAl alloys experienced abrasive wear mechanisms, the addition of Sn emerges as a promising alloying strategy, for enhancing ductility without significantly increasing material loss.

Förderung

  • National Research Foundation in South Africa under the Competitive Support Grant

Zitieren

APA

Magogodi, S., Mathabathe, M. N., Siyasiya, C. W., Bolokang, A. S., Bodunrin, M. O., & Maumela, M. (2026). Dry Sliding Tribology of γ-TiAl-Based Alloys. Crystals, 16(4), 228. https://doi.org/10.3390/cryst16040228

Vancouver

Magogodi S, Mathabathe MN, Siyasiya CW, Bolokang AS, Bodunrin MO, Maumela M. Dry Sliding Tribology of γ-TiAl-Based Alloys. Crystals. 2026;16(4):228. doi:10.3390/cryst16040228

BibTeX
@article{Magogodi2026,
  author = {Magogodi, Steven and Mathabathe, Maria Ntsoaki and Siyasiya, Charles Witness and Bolokang, Amogelang Sylvester and Bodunrin, Michael Oluwatosin and Maumela, Mbavhalelo},
  title = {Dry Sliding Tribology of γ-TiAl-Based Alloys},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {4},
  pages = {228},
  doi = {10.3390/cryst16040228}
}
Kostenlos starten →