EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Load Separation Criterion for Ductile Fracture Characterization of Thin Aluminum Sheets

Mohammed Y. Abdellah, Fawaz M. Abdullah, Abdulrahman M. Al-Ahmari, Mohamed K. Hassan

Crystals · 19.03.2026 · 16 (3) · 209

DOI: 10.3390/cryst16030209 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 19.03.2026. Verfasst von Mohammed Y. Abdellah und 3 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Raytheon Chair for Systems Engineering.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The characterization of ductile fracture in thin metallic sheets is challenging due to extensive plastic deformation and stable crack growth under plane-stress conditions. This study investigates the applicability of the load separation criterion as a single-specimen method for evaluating fracture behavior in thin aluminum sheets. Experimental tests were performed on double-edge-notched tension (DENT) specimens manufactured from a 1.2 mm thick commercial aluminum sheet with ligament lengths ranging from 4 to 20 mm. Load–displacement responses were analyzed using curve-fitting techniques to determine the separation parameter, geometry function, plastic η-factor, and the plastic component of the J-integral. The separation parameter stabilized in the plastic regime, and the geometry function followed a power-law relationship with the normalized ligament ratio, confirming the validity of the load separation assumption. The calculated fracture toughness values showed consistent averages of approximately 58–60 kJ/m2 across different fitting approaches, which are in good agreement with the essential work of fracture (EWF) value of about 51.5 kJ/m2 reported for the same material. These results demonstrate that the load separation approach provides a reliable and efficient framework for determining fracture parameters in thin ductile aluminum sheets using a single specimen. The methodology offers practical advantages for fracture assessment and structural integrity analysis of lightweight sheet structures in aerospace, automotive, and marine applications.

Förderung

  • Raytheon Chair for Systems Engineering

Zitieren

APA

Abdellah, M. Y., Abdullah, F. M., Al-Ahmari, A. M., & Hassan, M. K. (2026). Load Separation Criterion for Ductile Fracture Characterization of Thin Aluminum Sheets. Crystals, 16(3), 209. https://doi.org/10.3390/cryst16030209

Vancouver

Abdellah MY, Abdullah FM, Al-Ahmari AM, Hassan MK. Load Separation Criterion for Ductile Fracture Characterization of Thin Aluminum Sheets. Crystals. 2026;16(3):209. doi:10.3390/cryst16030209

BibTeX
@article{Abdellah2026,
  author = {Abdellah, Mohammed Y. and Abdullah, Fawaz M. and Al-Ahmari, Abdulrahman M. and Hassan, Mohamed K.},
  title = {Load Separation Criterion for Ductile Fracture Characterization of Thin Aluminum Sheets},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {209},
  doi = {10.3390/cryst16030209}
}
Kostenlos starten →