EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Sulfur on Hot Corrosion Behavior of Nickel-Based Superalloys at 900 °C

Dongxing Yue, Wenhao Feng, Yi Shen, Qian Gao, Ruijuan Pan, Xiaolong Su, Xiaoyong Zhang, Jianxiu Chang

Crystals · 13.03.2026 · 16 (3) · 197

DOI: 10.3390/cryst16030197 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 13.03.2026. Verfasst von Dongxing Yue und 7 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Projects of Xizang Autonomous Region of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nickel-based superalloys are extensively used in fabricating high-temperature gas turbine components, owing to their superior high-temperature strength, excellent structural stability, and remarkable hot corrosion resistance. The influence of impurity sulfur content on their hot corrosion performance is a core scientific issue in hot-end component compositional design and smelting. This study investigated chromium (Cr)-rich nickel-based superalloys with sulfur (S) contents of 3 ppm, 16 ppm, and 42 ppm via XRD, SEM, and an EPMA, focusing on their hot corrosion behavior under a 100% Na2SO4 deposit at 900 °C. The results indicated that their hot corrosion products were basically identical, forming a Cr-dominated outer oxide layer rich in Ti, Co, and Ni, an Al2O3-based inner corrosion zone, and a CrSx-dominated sulfide layer. With increasing sulfur content, the outer layer thickness decreased from approximately 30 μm to less than 20 μm, pores in the outer oxide layer increased in quantity and size, and internal sulfides and nitrides accumulated. The average depth of spallation increased from 55 μm for the S3 alloy to 80 μm for the S16 alloy, with the S42 alloy showing even more extensive spallation. The alloy’s hot corrosion performance deteriorated notably with increasing S content. The mechanism of sulfur’s effect on hot corrosion behavior is that sulfur in the alloy segregates at oxide film defects, enhancing defect stability and increasing their quantity and size. These defects serve as rapid diffusion channels for corrosive media, thereby accelerating the alloy’s hot corrosion rate.

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Projects of Xizang Autonomous Region of China

Zitieren

APA

Yue, D., Feng, W., Shen, Y., Gao, Q., Pan, R., Su, X., Zhang, X., & Chang, J. (2026). Effect of Sulfur on Hot Corrosion Behavior of Nickel-Based Superalloys at 900 °C. Crystals, 16(3), 197. https://doi.org/10.3390/cryst16030197

Vancouver

Yue D, Feng W, Shen Y, Gao Q, Pan R, Su X, et al. Effect of Sulfur on Hot Corrosion Behavior of Nickel-Based Superalloys at 900 °C. Crystals. 2026;16(3):197. doi:10.3390/cryst16030197

BibTeX
@article{Yue2026,
  author = {Yue, Dongxing and Feng, Wenhao and Shen, Yi and Gao, Qian and Pan, Ruijuan and Su, Xiaolong and Zhang, Xiaoyong and Chang, Jianxiu},
  title = {Effect of Sulfur on Hot Corrosion Behavior of Nickel-Based Superalloys at 900 °C},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {197},
  doi = {10.3390/cryst16030197}
}
Kostenlos starten →