EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Mechanical Properties of ZM6 Cast Magnesium Alloy with Through-Hole Defects Repaired by Ultrasonic-Assisted TIG Welding

Faming Shen, Zhien Chen, Ming Che, Zhaoxiang Chang, Xin Qiao, Yongjun Li, Guihua Li, Mingyue Zhao, Yunhao Xia, Sanbao Lin

Crystals · 09.03.2026 · 16 (3) · 182

DOI: 10.3390/cryst16030182 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 09.03.2026. Verfasst von Faming Shen und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study addresses the challenge of through-hole defects in ZM6 cast magnesium alloy components by proposing an innovative repair strategy using ultrasonic-assisted Tungsten Inert Gas (U-TIG) welding. The microstructure and mechanical properties of the repaired joint were systematically characterized through optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and room-temperature tensile testing. The results indicate that, assisted by the ultrasonic energy field, the repair zone successfully reconstitutes a typical and optimized triple-phase microstructure: (1) the matrix: α-Mg solid solution (dark gray), supersaturated with Nd and Zr; (2) the strengthening phase: a eutectic Mg12Nd phase (light gray), rich in Nd, distributed along grain boundaries acting as the primary strengthening component; (3) the grain refiner: dispersed Zr-rich particles (bright white spots), which effectively pin grain boundaries. Crucially, the application of ultrasound significantly refined the α-Mg grains and transformed the continuous network of the Mg12Nd phase into a more fragmented and uniform dispersion. This refined microstructure synergistically integrates the strengthening mechanisms of solid solution, precipitation hardening, and grain refinement. Consequently, the repaired joint exhibits excellent mechanical properties, achieving over 90% of the base metal’s tensile strength and elongation at room temperature. This work not only validates the feasibility of U-TIG welding for repairing ZM6 alloys but also provides a solid theoretical foundation and a promising technical pathway for the in-service repair and remanufacturing of high-performance magnesium alloy components.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Shen, F., Chen, Z., Che, M., Chang, Z., Qiao, X., Li, Y., Li, G., Zhao, M., Xia, Y., & Lin, S. (2026). Microstructure and Mechanical Properties of ZM6 Cast Magnesium Alloy with Through-Hole Defects Repaired by Ultrasonic-Assisted TIG Welding. Crystals, 16(3), 182. https://doi.org/10.3390/cryst16030182

Vancouver

Shen F, Chen Z, Che M, Chang Z, Qiao X, Li Y, et al. Microstructure and Mechanical Properties of ZM6 Cast Magnesium Alloy with Through-Hole Defects Repaired by Ultrasonic-Assisted TIG Welding. Crystals. 2026;16(3):182. doi:10.3390/cryst16030182

BibTeX
@article{Shen2026,
  author = {Shen, Faming and Chen, Zhien and Che, Ming and Chang, Zhaoxiang and Qiao, Xin and Li, Yongjun and Li, Guihua and Zhao, Mingyue and Xia, Yunhao and Lin, Sanbao},
  title = {Microstructure and Mechanical Properties of ZM6 Cast Magnesium Alloy with Through-Hole Defects Repaired by Ultrasonic-Assisted TIG Welding},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {182},
  doi = {10.3390/cryst16030182}
}
Kostenlos starten →