EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical and Surface Characterization of Stainless-Steel Nitride Thin Films Deposited at Different Substrate Temperatures

Faisal Alresheedi

Crystals · 06.02.2026 · 16 (2) · 119

DOI: 10.3390/cryst16020119 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 06.02.2026. Verfasst von Faisal Alresheedi. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Stainless-steel nitride thin films were deposited onto silicon substrates at different temperatures ranging from 150 to 600 °C using reactive magnetron sputtering. The influence of substrate temperature on nitrogen incorporation, surface roughness, microstructure, and mechanical properties was systematically investigated. X-ray photoelectron spectroscopy (XPS) analysis showed that the nitrogen content increased with substrate temperature, reaching a maximum value of 34 wt.% at 350 °C, while at higher substrate temperatures (450–600 °C), the nitrogen content decreased. X-ray diffraction analysis revealed that the coating structure strongly depends on the substrate temperature. At temperatures above 450 °C, the films comprise a multiphase structure consisting of CrN, bcc-Fe, and Ni. In contrast, films deposited below 450 °C are dominated by the S-phase, corresponding to a nitrogen-supersaturated fcc structure. Scanning electron microscopy (SEM) analyses confirmed microstructural evolution with substrate temperature, showing fine, compact grains at lower temperatures and coarser structures at higher temperatures. Surface roughness measured by a profilometer exhibited a minimum at 350 °C. The mechanical performance of the films was evaluated using micro-Knoop hardness measurements, together with the calculated elastic strain indicator (H/E) and resistance to the plastic deformation parameter (H3/E2). The results showed that hardness and these mechanical indicators reached their maximum values at a substrate temperature of 350 °C. These findings provide valuable insight into the deposition–structure–property relationships of stainless-steel nitride thin films for wear-resistant and protective coating applications.

Zitieren

APA

Alresheedi, F. (2026). Mechanical and Surface Characterization of Stainless-Steel Nitride Thin Films Deposited at Different Substrate Temperatures. Crystals, 16(2), 119. https://doi.org/10.3390/cryst16020119

Vancouver

Alresheedi F. Mechanical and Surface Characterization of Stainless-Steel Nitride Thin Films Deposited at Different Substrate Temperatures. Crystals. 2026;16(2):119. doi:10.3390/cryst16020119

BibTeX
@article{Alresheedi2026,
  author = {Alresheedi, Faisal},
  title = {Mechanical and Surface Characterization of Stainless-Steel Nitride Thin Films Deposited at Different Substrate Temperatures},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {119},
  doi = {10.3390/cryst16020119}
}
Kostenlos starten →