EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Mechanical Properties of Equiatomic CoCrFeNiMn High-Entropy Alloy Coatings Fabricated by High-Velocity Oxygen Fuel Spraying

Yedilzhan Kambarov, Zhuldyz Sagdoldina, Laila Sulyubayeva, Piotr Kowalewski, Aiym Nabioldina

Crystals · 30.01.2026 · 16 (2) · 103

DOI: 10.3390/cryst16020103 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 30.01.2026. Verfasst von Yedilzhan Kambarov und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-entropy coatings based on CoCrFeNiMn obtained by thermal spraying have demonstrated the potential to improve the wear resistance of traditional materials used in extreme conditions. The aim of the work was to study the effect of the oxygen/fuel ratio when using kerosene as fuel in the HVOF process on the microstructural characteristics of CoCrFeNiMn coatings, including phase composition, microhardness, elastic modulus, and wear resistance. Phase and microstructural transformations in gas-atomized powder during HVOF spraying were analyzed using XRD, SEM, and EDS methods. The tribological and mechanical properties of the coatings obtained were also evaluated. The results obtained are consistent with thermodynamic predictions based on the Scheil model for non-equilibrium conditions. The data obtained indicate the high potential of high-entropy CoCrFeNiMn alloys for use as protective coatings for industrial purposes. In addition, the results of the study emphasize the promise of using thermodynamic prediction of high-entropy alloys using Thermo-Calc software. The best mechanical and tribological properties were obtained in the HVOF 1 regime, which provided a maximum microhardness of 783.8 HV and a minimum wear rate of 7.45 × 10−5 mm3 × N−1 × m−1.

Förderung

  • Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Kambarov, Y., Sagdoldina, Z., Sulyubayeva, L., Kowalewski, P., & Nabioldina, A. (2026). Microstructure and Mechanical Properties of Equiatomic CoCrFeNiMn High-Entropy Alloy Coatings Fabricated by High-Velocity Oxygen Fuel Spraying. Crystals, 16(2), 103. https://doi.org/10.3390/cryst16020103

Vancouver

Kambarov Y, Sagdoldina Z, Sulyubayeva L, Kowalewski P, Nabioldina A. Microstructure and Mechanical Properties of Equiatomic CoCrFeNiMn High-Entropy Alloy Coatings Fabricated by High-Velocity Oxygen Fuel Spraying. Crystals. 2026;16(2):103. doi:10.3390/cryst16020103

BibTeX
@article{Kambarov2026,
  author = {Kambarov, Yedilzhan and Sagdoldina, Zhuldyz and Sulyubayeva, Laila and Kowalewski, Piotr and Nabioldina, Aiym},
  title = {Microstructure and Mechanical Properties of Equiatomic CoCrFeNiMn High-Entropy Alloy Coatings Fabricated by High-Velocity Oxygen Fuel Spraying},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {103},
  doi = {10.3390/cryst16020103}
}
Kostenlos starten →