Effect of Current Density on Shear Performance and Fracture Behavior of Cu/Sn-58Bi/Cu Solder Joints
Crystals · 31.10.2025 · 15 (11) · 945
DOI: 10.3390/cryst15110945 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 31.10.2025. Verfasst von Kailin Pan und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Guangxi Province, Guangxi Key Laboratory of Manufacturing System and Advanced Manufacturing Technology.
Abstract (Originalsprache)
Characterized by its low melting temperature of 138 °C, the eutectic Sn-58Bi solder expands the melting temperature range of interconnect joints in electronic packaging, making it widely used in multi-level packaging processes. However, its reliability at higher current densities poses a challenge. This paper employs a hybrid process combining laser soldering and hot-air reflow to fabricate Cu/Sn-58Bi/Cu solder joints in ball grid array (BGA) structures. Through mechanical testing under current loading, the effects of increasing current density (0 A/cm2, 0.85 × 103 A/cm2, 1.70 × 103 A/cm2, 2.55 × 103 A/cm2, 3.40 × 103 A/cm2, 4.25 × 103 A/cm2) were studied systematically. Results indicate that the shear strength decreases markedly with increasing current density, exhibiting a reduction of approximately 5.63% to 95.75%. This degradation is initiated by the overall temperature increase and material softening due to Joule heating. It is further exacerbated by the loss of the non-thermal electron wind’s strengthening contribution, which weakens as the dominant thermal impact escalates with current density. Fracture mode transitions from ductile failure within the solder matrix to a ductile-brittle mixture at the solder/IMC interface, with the transition initiating at 3.40 × 103 A/cm2. Finite element simulations reveal that current crowding in Sn-rich regions and at the solder/IMC interface induces localized Joule heating and thermomechanical strain, which jointly drive the degradation in shear strength and the shift in fracture path.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Guangxi Province
- Guangxi Key Laboratory of Manufacturing System and Advanced Manufacturing Technology
- Project for Enhancing Young and Middle aged Teacher’s Research Basis Ability in Colleges of Guangxi
- Anhui Postdoctoral Scientific Research Program Foundation
Zitieren
APA
Pan, K., Chen, Z., Liu, M., Ke, Z., Wang, B., He, K., Huang, W., & He, S. (2025). Effect of Current Density on Shear Performance and Fracture Behavior of Cu/Sn-58Bi/Cu Solder Joints. Crystals, 15(11), 945. https://doi.org/10.3390/cryst15110945
Vancouver
Pan K, Chen Z, Liu M, Ke Z, Wang B, He K, et al. Effect of Current Density on Shear Performance and Fracture Behavior of Cu/Sn-58Bi/Cu Solder Joints. Crystals. 2025;15(11):945. doi:10.3390/cryst15110945
BibTeX
@article{Pan2025,
author = {Pan, Kailin and Chen, Zimeng and Liu, Menghao and Ke, Zhanglong and Wang, Bo and He, Kaixuan and Huang, Wei and He, Siliang},
title = {Effect of Current Density on Shear Performance and Fracture Behavior of Cu/Sn-58Bi/Cu Solder Joints},
journal = {Crystals},
year = {2025},
volume = {15},
number = {11},
pages = {945},
doi = {10.3390/cryst15110945}
}
EUVIMED