EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Cold Metal Transfer Parameters on Weld Bead Geometry, Mechanical Properties, and Corrosion Performance of Dissimilar Aluminium Alloys

Balram Yelamasetti, Mohammed Zubairuddin, Sri Phani Sushma I, Mohammad Faseeulla Khan, Syed Quadir Moinuddin, Hussain Altammar

Crystals · 13.08.2025 · 15 (8) · 722

DOI: 10.3390/cryst15080722 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 13.08.2025. Verfasst von Balram Yelamasetti und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminium alloys are known for their high strength-to-weight-ratio offering a wide range of applications in the aerospace and automotive industries. However, challenges exist like porosity, oxidation, solidification shrinkage, hot cracking, etc., in joining aluminium alloys. To address these challenges, there is a necessity to understand the process parameters for the welding/joining of aluminium alloys. The present study aims to investigate the effect of cold metal transfer (CMT) welding process parameters (i.e., welding speed and wire feed rate) on mechanical properties for dissimilar AA6061-AA6082 alloys weld joints. Two different welding conditions viz. CMT1 (speed: 0.5 m/min with feed: 5 m/min) and CMT2 (speed: 0.3 m/min with feed: 3 m/min), were considered. The weldments were deployed for testing different mechanical properties such as tensile, impact, hardness, corrosion tests and bead profile geometries. The results reveal that CMT1 has better mechanical properties (tensile_233 MPa; impact_8 J; corrosion rate_0.01368 mm/year) than CMT2, showing the welding speed and wire feed rate play a significant role in the joint performance. The heat affected zone and fusion zone are narrow for CMT1 when compared with CMT2. The present study provides insights into the CMT process and dissimilar joining of aluminium alloys that might be helpful for additive manufacturing of dissimilar aluminium alloys as future research directions.

Förderung

  • Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University

Zitieren

APA

Yelamasetti, B., Zubairuddin, M., I, S. P. S., Khan, M. F., Moinuddin, S. Q., & Altammar, H. (2025). Influence of Cold Metal Transfer Parameters on Weld Bead Geometry, Mechanical Properties, and Corrosion Performance of Dissimilar Aluminium Alloys. Crystals, 15(8), 722. https://doi.org/10.3390/cryst15080722

Vancouver

Yelamasetti B, Zubairuddin M, I SPS, Khan MF, Moinuddin SQ, Altammar H. Influence of Cold Metal Transfer Parameters on Weld Bead Geometry, Mechanical Properties, and Corrosion Performance of Dissimilar Aluminium Alloys. Crystals. 2025;15(8):722. doi:10.3390/cryst15080722

BibTeX
@article{Yelamasetti2025,
  author = {Yelamasetti, Balram and Zubairuddin, Mohammed and I, Sri Phani Sushma and Khan, Mohammad Faseeulla and Moinuddin, Syed Quadir and Altammar, Hussain},
  title = {Influence of Cold Metal Transfer Parameters on Weld Bead Geometry, Mechanical Properties, and Corrosion Performance of Dissimilar Aluminium Alloys},
  journal = {Crystals},
  year = {2025},
  volume = {15},
  number = {8},
  pages = {722},
  doi = {10.3390/cryst15080722}
}
Kostenlos starten →