Investigation of In Vitro Corrosion and Wear Properties of Biomedical Coatings Applied to Ti6Al4V Alloy Manufactured by Selective Laser Melting
Crystals · 27.03.2025 · 15 (4) · 316
DOI: 10.3390/cryst15040316 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 27.03.2025. Verfasst von Ali İhsan Bahçepinar und 1 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study focuses on enhancing the biomedical performance of PBF-LB Ti6Al4V, produced using Selective Laser Melting (SLM), an advanced manufacturing technology widely used for patient-specific medical devices and implants. Hydroxyapatite (HA), titanium (Ti), and bilayer Ti/HA coatings were applied, using the powder flame spray coating technique. A comprehensive analysis was conducted to examine the microstructural, chemical, and mechanical properties of the coatings. Surface analysis was performed using a scanning electron microscope (SEM), chemical composition was determined by energy-dispersive spectroscopy (EDS), crystal structure was analyzed via X-ray diffraction (XRD), and surface roughness was evaluated through topographic analyses. Additionally, in vitro wear and corrosion resistance tests, crucial for biomedical applications, were conducted. In wear tests, HA coatings exhibited the lowest wear resistance with the highest wear rate (73.83 × 10−3 mm3/N·m), while Ti coatings showed the highest wear resistance (6.32 × 10−3 mm3/N·m), and Ti/HA coatings demonstrated an intermediate performance (34.22 × 10−3 mm3/N·m). Corrosion tests revealed that bilayer Ti/HA coatings provided the best protection (0.00009 mm/year), followed by Ti coatings (0.0002 mm/year) and HA coatings (0.003 mm/year). The results indicate that Ti/HA coatings offer the most suitable biomedical performance.
Zitieren
APA
Bahçepinar, A. İ., & Aydin, İ. (2025). Investigation of In Vitro Corrosion and Wear Properties of Biomedical Coatings Applied to Ti6Al4V Alloy Manufactured by Selective Laser Melting. Crystals, 15(4), 316. https://doi.org/10.3390/cryst15040316
Vancouver
Bahçepinar Aİ, Aydin İ. Investigation of In Vitro Corrosion and Wear Properties of Biomedical Coatings Applied to Ti6Al4V Alloy Manufactured by Selective Laser Melting. Crystals. 2025;15(4):316. doi:10.3390/cryst15040316
BibTeX
@article{Bahepinar2025,
author = {Bahçepinar, Ali İhsan and Aydin, İbrahim},
title = {Investigation of In Vitro Corrosion and Wear Properties of Biomedical Coatings Applied to Ti6Al4V Alloy Manufactured by Selective Laser Melting},
journal = {Crystals},
year = {2025},
volume = {15},
number = {4},
pages = {316},
doi = {10.3390/cryst15040316}
}
EUVIMED