Evaluation of Fracture Toughness of γ-Phase Containing Cemented Carbides by Using Through-Thickness Micronotches Shaped by Ultrashort Pulsed Laser Ablation
Crystals · 18.03.2025 · 15 (3) · 279
DOI: 10.3390/cryst15030279 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 18.03.2025. Verfasst von Marc Serra und 6 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish Government (Ministerio de Ciencia, Innovación y Universidades and Agencia Estatal de Investigación) and European Union (FEDER), MICIU/AEI/10.13039/501100011033.
Abstract (Originalsprache)
WC-Co cemented carbides, commonly known as hardmetals, are composite materials constituted by hard ceramic particles embedded in a ductile metal matrix. Due to their unique microstructural assemblage, these materials exhibit excellent combinations of hardness, strength, and toughness, consolidating them as a first choice for tools, structural and wear components. During recent decades, extensive research and technological advancements have driven the development of alternative cemented carbide grades, where traditionally used WC or Co are partially or entirely replaced. Within this context, hardmetals containing a third γ-phase (mixed cubic carbides) represent an interesting alternative. However, accurate evaluation of their fracture toughness remains a significant issue, especially as conventional methods using either indentation or precracking approaches are limited by either restricted implementation of fracture mechanics analysis or testing challenges. Within this context, this study proposes, implements, and validates the use of a novel laser-micronotching methodology to evaluate the fracture toughness of a γ-phase containing cemented carbide grade. For comparison purposes, the investigation also includes assessment of such a property by means of two other well-established testing methodologies. Moreover, similar experimental work was conducted in a plain WC-Co system with similar microstructural features. It is shown that machining of a through-thickness micronotch by means of ultra-short pulsed laser ablation is a reliable and efficient method for fracture toughness evaluation of γ-phase containing hardmetals. The main reason behind this is its capability for providing a precise and reproducible micronotch, with minimal thermal damage, that finally acts as a real through-thickness crack for which a stress-intensity factor is well-defined under flexural testing. Furthermore, toughness values obtained are in satisfactory agreement with those determined using precracked specimens with machined large notches and/or indentation techniques.
Förderung
- Spanish Government (Ministerio de Ciencia, Innovación y Universidades and Agencia Estatal de Investigación) and European Union (FEDER)
- MICIU/AEI/10.13039/501100011033
Zitieren
APA
Serra, M., Batista, R., Cinca, N., Tarrés, E., Jiménez-Piqué, E., Moreno, P., & Llanes, L. (2025). Evaluation of Fracture Toughness of γ-Phase Containing Cemented Carbides by Using Through-Thickness Micronotches Shaped by Ultrashort Pulsed Laser Ablation. Crystals, 15(3), 279. https://doi.org/10.3390/cryst15030279
Vancouver
Serra M, Batista R, Cinca N, Tarrés E, Jiménez-Piqué E, Moreno P, et al. Evaluation of Fracture Toughness of γ-Phase Containing Cemented Carbides by Using Through-Thickness Micronotches Shaped by Ultrashort Pulsed Laser Ablation. Crystals. 2025;15(3):279. doi:10.3390/cryst15030279
BibTeX
@article{Serra2025,
author = {Serra, Marc and Batista, Ramon and Cinca, Núria and Tarrés, Elena and Jiménez-Piqué, Emilio and Moreno, Pablo and Llanes, Luis},
title = {Evaluation of Fracture Toughness of γ-Phase Containing Cemented Carbides by Using Through-Thickness Micronotches Shaped by Ultrashort Pulsed Laser Ablation},
journal = {Crystals},
year = {2025},
volume = {15},
number = {3},
pages = {279},
doi = {10.3390/cryst15030279}
}
EUVIMED